11/15/18KW Electric Swimming Pool Water Heater Thermostat Hot Tub Spa. Swimming pool heater tankless electric swimming pool thermostat SPA water heater 15KW 220V smart heat exchanger digital display temperature easy set digital thermostat control self modulating eco energy saving booster to pool heat pump stainless steel liner. This machine can be used with Single-phase 220V or dual-phase 110V 2. Please confrim the wire referring to the power of the unit, here are the current of different type of machine 9KW/220V = 41A, about 41A 11KW/220V =50A, about 50A 15KW/220V =68A, about 68A 18KW/220V =82A, about 82A 3. This was not an instant water heater, the thermostat circulates with a water pump, and the heat generated will be immediately brought into the swimming pool by the circulating water. Under appropriate circumstances, the temperature of the entire swimming pool will slowly increase, and it takes longer to heat up for the first time. Liner material: stainless steel. Connection size: 40 mm (1.57). Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. Intelligent temperature control, stable performance, safe and reliable. Automatic constant temperature, can be set according to the required water temperature. The maximum set temperature is approx. Safe and reliable, mechanical pressure switch. When the pressure is below the set value, the power supply is automatically switched off. Do not heat sea water or salt water. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). 1 kW is suitable for 1 ft³. 5.5KW thermostat is suitable for? 127 ft³ pool / 3.6m³. The 9KW thermostat is suitable for a pool with? 212 ft³ / 6m³. The 11KW thermostat is suitable for a pool with? 259 ft³ / 7.3m³. The 15KW thermostat is suitable for a pool of? 353 ft³ / 10m³. The 18KW thermostat is suitable for a pool with? 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. Manual reset temperature switch. Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water. The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. 1 pool heater 1 English manual. We are not responsible for undeliverable address. Christmas or other reasons. Dear friend: Welcome to me, my services are available: Monday to Friday: 8:30 a. To 6:00 p. (Beijing China time) 1. Specifications Liner material: stainless steel Voltage: 220V Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H.
Electric Swimming Pool Water Heater Thermostat SPA Hot Tub Thermostat 11/15/18KW. Swimming pool heater tankless electric swimming pool thermostat SPA water heater 11KW 220V smart heat exchanger digital display temperature easy set digital thermostat control self modulating eco energy saving booster to pool heat pump stainless steel liner. Liner material: stainless steel. Voltage: 220V (Transformer required). Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. Intelligent temperature control, stable performance, safe and reliable Automatic constant temperature, can be set according to the required water temperature. The maximum set temperature is approx. Safe and reliable, mechanical pressure switch. When the pressure is below the set value, the power supply is automatically switched off. Do not heat sea water or salt water. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). 1 kW is suitable for 1 ft³ 5.5KW thermostat is suitable for? 127 ft³ pool / 3.6m³ The 9KW thermostat is suitable for a pool with? 212 ft³ / 6m³. The 11KW thermostat is suitable for a pool with? 259 ft³ / 7.3m³. The 15KW thermostat is suitable for a pool of? 353 ft³ / 10m³ The 18KW thermostat is suitable for a pool with? 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. Manual reset temperature switch. Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water. The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. We are always working according to international standards and serve our customers from all over the world. Taking the purpose of “meeting different requirements from our overseas customers”. Your comments about our products are welcomed. We hope to have the opportunity to establish business relationships with you. Our goal is “providing you both high quality products and the best prices”. Feedback is very important to us. It is impossible to address issues if we do not know about them! We are not responsible for undeliverable address. X’mas or other reasons. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time) 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time.
Specifications: Liner material: stainless steel Voltage: 220V Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment.
220V 11/15/18KW Electric Swimming Pool Water Heater Thermostat US. Manual reset temperature switch? Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water? The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. Liner material: stainless steel Voltage: 220V Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). The 1KW is suitable for 1 ft³? The 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³? The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³? The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³? The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³? The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³ It is recommended to use the thermostat with a circulating water pump: 1. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. Prohibit the use of seawater or salt-added disinfectants to sterilize thermostats(Excessive chlorine in disinfecting water is not good either, About 5 grams of water per cubic meter), as highly concentrated saltwater is very corrosive to stainless steel. 1 pool heater 1 English manual. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specifications: Liner material: stainless steel Voltage: 220V Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment.
11/15/18KW Electric Swimming Pool Water Heater Thermostat Hot Tub Spa 220V. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. Prohibit the use of seawater or salt-added disinfectants to sterilize thermostats(Excessive chlorine in disinfecting water is not good either, About 5 grams of water per cubic meter), as highly concentrated saltwater is very corrosive to stainless steel. Liner material: stainless steel Voltage: 220V Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). The 1KW is suitable for 1 ft³? The 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³? The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³? The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³? The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³? The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. 1 pool heater 1 English manual. Manual reset temperature switch? Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water? The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “happybuy686″ and is located in this country: US. This item can be shipped to United States.
- Option: 15KW 220V
- Brand: Unbranded
- Type: Pool Heater
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,Inflatable & Kid Pools
- Voltage: 220 V
- Features: Portable,Digital Display
- Heating System: Instantaneous (Tankless)
- Water Temperature Range: max. about 55℃,130 °F
- Country/Region of Manufacture: China
- Water Connection Location: Side
- Custom Bundle: No
- Amperage: 50 A
- Item Height: 15 in
- Item Length: 19 in
- Item Width: 4 in
11/15/18KW Electric Swimming Pool Heater SPA Bathe Bath Hot Tub Thermostat 220V. Electric Pool Heater 11KW/15KW/18KW 220V for Above Ground Inground Pools, Swimming Pool Electric Heater SPA Heater Electric Assistant Digital fit for Thermostat. Swimming pool heater tankless electric swimming pool thermostat SPA water heater 11KW 220V smart heat exchanger digital display temperature easy set digital thermostat control self modulating eco energy saving booster to pool heat pump stainless steel liner. Liner material: stainless steel. Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. Intelligent temperature control, stable performance, safe and reliable Automatic constant temperature, can be set according to the required water temperature. The maximum set temperature is approx. Safe and reliable, mechanical pressure switch. When the pressure is below the set value, the power supply is automatically switched off. Do not heat sea water or salt water. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). 2KW is suitable for 1. The 11KW thermostat is suitable for a pool with. = 5.5 CBM/1453 gallon. The 15KW thermostat is suitable for a pool of = 7.5. The 18KW thermostat is suitable for a pool with =. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. Manual reset temperature switch. Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water. The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. 1 pool heater 1 English manual. Your comments about our products are welcomed. We hope to have the opportunity to establish business relationships with you. Our goal is “providing you both high quality products and the best prices”. Feedback is very important to us. It is impossible to address issues if we do not know about them! We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always highly appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 9:00 to 18:00 (Beijing China time) 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specifications: Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment Description: Intelligent temperature control, stable performance, safe and reliable Automatic constant temperature, can be set according to the required water temperature. Package include: 1 pool heater 1 English manual. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “sunshine1001ye” and is located in this country: US. This item can be shipped to United States.
- Sty: 11KW
- Brand: Unbranded
- Type: Electric Pool Heater Hot Tub Thermostat
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,In Ground Pools
- Voltage: 220V
- Model: 11KW Electric Swimming Pool Thermostat
- Features: Auto Shut-Off,Digital Display,Portable
- Tank Capacity: tankless
- Water Temperature Range: max. about 55℃ / 131 °F
- Amperage: 50A
- Country/Region of Manufacture: China
- Item Weight: 14.3 Lbs
- Phase: Single Phase
- Connection size: 40 mm (1.57 \
11/15/18KW Electric Swimming Pool Water Heater Thermostat Hot Tub Spa. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. Prohibit the use of seawater or salt-added disinfectants to sterilize thermostats(Excessive chlorine in disinfecting water is not good either, About 5 grams of water per cubic meter), as highly concentrated saltwater is very corrosive to stainless steel. Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). The 1KW is suitable for 1 ft³? The 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³? The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³? The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³? The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³? The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. 1 pool heater 1 English manual. Manual reset temperature switch? Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water? The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specifications: Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “comettgood” and is located in this country: US. This item can be shipped to United States.
- Option: 18KW 220V
- Brand: Unbranded
- Type: Pool Heater
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,Inflatable & Kid Pools
- Voltage: 220 V
- Features: Portable,Digital Display
- Heating System: Instantaneous (Tankless)
- Water Temperature Range: max. about 55℃,130 °F
- Country/Region of Manufacture: China
- Water Connection Location: Side
- Custom Bundle: No
- Amperage: 50 A
- Item Height: 15 in
- Item Length: 19 in
- Item Width: 4 in
220V 11/15/18KW Electric Swimming Pool Water Heater Thermostat Hot Tub Spa. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. Prohibit the use of seawater or salt-added disinfectants to sterilize thermostats(Excessive chlorine in disinfecting water is not good either, About 5 grams of water per cubic meter), as highly concentrated saltwater is very corrosive to stainless steel. Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). The 1KW is suitable for 1 ft³? The 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³? The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³? The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³? The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³? The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. 1 pool heater 1 English manual. Manual reset temperature switch? Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water? The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. We are not responsible for undeliverable address. X’mas or other reasons. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time) 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specifications: Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “hmmao_t” and is located in this country: US. This item can be shipped to United States.
- Option: 11KW 220V
- Brand: Unbranded
- Type: Pool Heater
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,Inflatable & Kid Pools
- Voltage: 220 V
- Features: Portable,Digital Display
- Heating System: Instantaneous (Tankless)
- Water Temperature Range: max. about 55℃,130 °F
- Country/Region of Manufacture: China
- Water Connection Location: Side
- Custom Bundle: No
- Amperage: 50 A
- Item Height: 15 in
- Item Length: 19 in
- Item Width: 4 in
11/15/18KW Electric Swimming Pool Water Heater Thermostat Hot Tub SPA 220V. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. Prohibit the use of seawater or salt-added disinfectants to sterilize thermostats(Excessive chlorine in disinfecting water is not good either, About 5 grams of water per cubic meter), as highly concentrated saltwater is very corrosive to stainless steel. Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). The 1KW is suitable for 1 ft³? The 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³? The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³? The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³? The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³? The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. 1 pool heater 1 English manual. Manual reset temperature switch? Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water? The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specifications: Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “pytgv_go” and is located in this country: US. This item can be shipped to United States.
- Option: 15KW 220V
- Brand: Unbranded
- Type: Pool Heater
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,Inflatable & Kid Pools
- Voltage: 220 V
- Features: Portable,Digital Display
- Heating System: Instantaneous (Tankless)
- Water Temperature Range: max. about 55℃,130 °F
- Country/Region of Manufacture: China
- Water Connection Location: Side
- Custom Bundle: No
- Amperage: 50 A
- Item Height: 15 in
- Item Length: 19 in
- Item Width: 4 in
11/15/18KW 220V Pool Heater Thermostat Swimming Pool SPA Electric Water Heater. Liner material: stainless steel. Voltage: 220V (Transformer required). Power: 11KW / 15KW / 18KW. Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). 1 kW is suitable for 1 ft³ 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³ The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³ The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³ The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³ The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³ It is recommended to use the thermostat with a circulating water pump: Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. Manual reset temperature switch: Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water. The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. Temperature limit switch: It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. Fuse protection: If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Power protection switch: Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. Smart self-diagnosis function: The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. 1 pool heater 1 English manual. Intelligent temperature control, stable performance, safe and reliable Automatic constant temperature, can be set according to the required water temperature. The maximum set temperature is approx. Safe and reliable, mechanical pressure switch. When the pressure is below the set value, the power supply is automatically switched off. Do not heat sea water or salt water. Policy: And this area is the details contents of your policies. You can add a banner for this policy as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. Return: This is the contents of your Return. You can add a banner for this Return as header and add text descriptions here. Specifications: Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment Description: Intelligent temperature control, stable performance, safe and reliable Automatic constant temperature, can be set according to the required water temperature. Package include: 1 pool heater 1 English manual. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “emiloveshop” and is located in this country: US. This item can be shipped to United States.
- Sty: 11KW
- Brand: Unbranded
- Type: Electric Pool Heater Hot Tub Thermostat
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,In Ground Pools
- Voltage: 220V
- Model: 11KW Electric Swimming Pool Thermostat
- Features: Auto Shut-Off,Digital,manual reset termerature control switch
- Tank Capacity: tankless
- Water Temperature Range: max. about 55℃ / 131 °F
- Amperage: 50A
- Country/Region of Manufacture: China
- Item Height: 15 in
- Item Length: 19 in
- Item Width: 4 in
- Item Weight: 14.3 Lbs
- Phase: Single Phase
- Connection size: 40 mm (1.57 \
