The thermostat heating thermostat system applies to so spa, swimming pool, jacuzzi, adjusted according to the temperature required, heating, temperature, the temperature at 20 55 ° C adjustable, can be set within 1 to 15 hours. And when the water level is lower than the original set value, the system will automatically turn off the power, and the automatic climate control, safe and reliable. Output power:15KW/11KW/5.5KW Current:50AMPS. Thermostat will first reach the preset temperature(not exceeding 40 ° C /104 ° F), then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature. Intelligent thermostat is suitable for large and medium-sized swimming pool/Hot spring pool/Bath pool/Massage pool/Spa pool and other places, with led display to adjust the time and temperature. Pool thermostat equipment must be “parallel” or “below” the pool. Operation sequence: first turn on the water pump, then turn on the thermostat; Shutdown is to first turn off the thermostat, wait for a while (10 seconds to 1 minute depending on the power of the thermostat) and then turn off the water pump. The 11KW/15KW thermostat is suitable for a pool of = 353 ft³ / 10m³. It is recommended to use the thermostat with a circulating water pump: Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. Manual reset temperature switch: Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water. The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. Temperature limit switch: It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. Fuse protection: If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Power protection switch: Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. Smart self-diagnosis function: The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. A, The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. B, No mechanical sensors, avoid any mechanical failure to affect the function of the heater. C, Avoid affection of ion accumulation to mechanical sensors. D, Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. Note:This item only support 220V. Operating: touch screen/control knob. Storage / Tankless: Storage. Capacity: less than 530 gallon of water. Feature: Computer Control Panel. Material: Aluminum-coated Plate/Stainless Steel Tube. Product Size: 4.9 x 7.1 x 5.1. Pipe Diameter: 2/5.08 cm. Item Weight: 3.5KG. Capacity: less than 2640 gallon of water/10CBM. Product Size: 18.7 x 14 x 3.9. PItem Weight: 16.5 lbs. Note:Product Operation sequence: first open the pump power, and then open the thermostat; thermostat shut off first, then turn off the pump. 1 x Pool Heater. 1 x User Manual. International buyers please note. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “guyang_54″ and is located in this country: CN. This item can be shipped worldwide.
- Size: 15KW
- Brand: Unbranded
- Type: Heat Pump
- UPC: 991643244961