155,000 BTU Titanium Tube and Shell. GPM Boiler Side 8.46. GPM Pool Side 62.66. Boiler Ports – 1 NPT. Pool Ports – 1 1/2 NPT. Port to Port – 9 1/8. Number of Tubes – 30. PSI Drop Hot 1.10. PSI Drop Cold 1.58. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 13,330 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 1″ – (to/from Pool) 1 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precaustions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 sat, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitations and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.
- Brand: Undisclosed
- MPN: Does not apply
- UPC: 689807256607
- Type: Heat Exchanger
Swimming Pool Heat Exchanger 155kBtu Stainless Steel 316L Opposite Side 1 1/2″ and 1″ FPT High Heating Efficiency for Solar Pool Heating! Our innovative spiral twisted corrugated tube design is engineered to maximize Solar or Boiler energy, increasing the overall thermal efficiency of the system. Our Swimming Pool Heat Exchangers work well with Solar heating systems and many other heat sources. The tube’s design also. Ensures high velocities inside the unit, making our Swimming Pool Heat Exchanger a very reliable , efficient and cost effective way to transfer heat indirectly between any hot water circuit, steam circuit and any pool or spa application. These heat exchangers can also be used in floor heating, snow melting, and other residential/industrial applications. Our Swimming Pool Heat Exchangers come in a wide range of sizes and materials to suit your needs, so please check our other listings if you need a different size or type. We also have this model with same side ports available. This listing is for the Stainless Steel version. The Titanium version is highly recommended for salt water systems, as it is the only model that can withstand that kind of water. About us: With over 10 years’ experience of working with heating systems, we at Alfa Heating Supply have the skills and expertise to help you with your projects. We sell the components needed for floor heating, domestic hot water heating, swimming pool heating, and other heating systems. High efficiency, coefficient up to 10000 W/m2°C. Heat exchanging capacity 3-7 times that of traditional equipment. Stainless Steel construction ensures corrosion resistance. High flow rates through our heat exchangers make them inherently self-cleaning. Easy installation and durable. Specifications of Swimming Pool Heat Exchanger. Shell (Pool) / Tube (Hot) Connections. 1 1/2″ / 1″. Hot Water Flow Volume. Hot Water Pressure Drop. Cold Water Flow Volume. Cold Water Pressure Drop. 22″ x 6″ x 6. >>Want to know more? Check out our website for more specifications and details! Applications of Swimming Pool Heat Exchanger. Residential and Industrial Applications. Forced Air Heating Systems. Solar Hot Water Heating. Our other Heat Exchangers. Brazed Plate Heat Exchanger. Hydraulic and Lube Oil Coolers. Tap Water and Radiator Heating. Heating and Cooling in HVAC installations. Geothermic and Solar Heating. Evaporation and Condensation in Refrigeration Systems. Steam Heating; District or Zone Heating Systems. Link to product page. Side Arm Heat Exchanger. Domestic Hot Water Heating. Water to Air Heat Exchanger. Residential Heating and Cooling. Apartment Buildings and Condominiums. Swimming Pool Heat Exchanger. Pool, Spa, Hot Tub Heating. Oil Cooling and Heating. We are also closed for major holidays. Support and Contact: Have any questions? The item “Solar Swimming Pool Heat Exchanger 155k SS316L Opposite Side 1 1/2+1FPT” is in sale since Wednesday, April 05, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “alfaheatingsupply” and is located in Lancaster, Pennsylvania. This item can be shipped to United States.
- Brand: AB
- Model: SP-155K
- MPN: Does Not Apply
- Material: Stainless Steel 316L
Tube Side Connections (Straight-Through/Boiler): 1 FNPT. Shell Side Connections (Side Outlets/Pool): 1-1/2 FNPT. Operating Temperature Range: 18°F – 248°F. Operating Pressure: 190 psi. Dimensions: see “Product Specifications” link under “Literature” section. Hot Tub/Spa/Swimming Pool Heating. Marine (Salt Water) Applications. Outdoor Wood Boilers, Furnaces, Stoves. Brewing, Dairy or Wine Processing. Titanium construction offers unmatched corrosion resistance. Fully welded construction ensures long-lasting performance. Helically wound tubes improve heat transfer. Large inlet/outlet ports allow for high flow rates with low pressure drop. The item “155K BTU TITANIUM Shell & Tube Heat Exchanger Swimming Pool Salt Water Boiler” is in sale since Tuesday, June 14, 2016. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “importsflorida” and is located in Tampa, Florida. This item can be shipped to United States, to Canada.
- Brand: Unbranded
- MPN: Does Not Apply