Heating capacity(A80.6W80.6): 14331BTU; Heating capacity(A56W78.8): 8496BTU, Can heat above ground pools from 2700 gallons and can raise water temperature quickly and efficiently. It’s your perfect heat pump solution for above ground swimming pools, hot tub or spas.
Heating capacity(A80.6W80.6): 14331BTU; Heating capacity(A56W78.8): 8496BTU, Can heat above ground pools from 2700 gallons and can raise water temperature quickly and efficiently. It’s your perfect heat pump solution for above ground swimming pools, hot tub or spas.
11800 BTU Swimming Pool Mini Heat Pump for Above-Ground Pools. Mini Heat Pump: This electric pool heater is suitable for small pools up to 3962 gallons.
Our electric pool heater can operate at high condensing temperatures throughout the year. Operate at a high load in summer and a large pressure ratio in winter. It is required to be more reliable than air conditioning compressors. Our electric pool heater is suitable for small pools of up to. The outlet water temperature is generally required to be up to 40? . The larger the pool, the longer the heating time. It’s your perfect heat pump solution for above-ground swimming pools, hot tubs, or spas. Our galvanized steel body panels with cute and graceful designs are impervious to rust and deterioration. The setting water temperature is available on the digital LED display. Let the temperature display be more intuitive, and allow for simple and quick control of settings. Allowing fast and easy hookup without professional installation. With an innovative flat-tube titanium heat exchanger, the heat exchanging efficiency is 30% higher than spiral tubes. The compressors have obvious advantages in terms of operating heating efficiency throughout the year, especially the heating performance in winter. Available with child lock. Advanced protection system with auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. We are sincerely willing to provide you with the best service. GTHP035HSPmn Heating capacity(A80.6W80.6): 14331BTU Heating capacity(A56W78.8): 8496BTU Rated power input: 0.65KW Rated current: 7.5A COPat A27/W27:4.5W/W Power supply:110-120V/60Hz/1Ph Noise10m/1m:43dB(A)/52dB(A) Water connection:32or38mm Advised water flow:2m³/h Water proof class:IPX4 Max. Discharge pressure:4.2MPa Min. 1MPa Water pressure drop:15kPa Refrigerant:R410A(0.45kg) GWPvale:2088 CO2 equivalent:0.80tonnes WeightNet/Gross: 21/24kg. 2X Water pipe fixed connector. Different angle of the item.
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. 135 kBtu Pool Heat Exchanger Shell &Tube Heat Exchanger for Spas Swimming Pools. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Raypak Electronic Ignition Natural Gas Heater (Various BTUs). Has a polyester-coated, non-corrosive cabinet that is more durable than solvent-borne- and waterborne-coated metal cabinets. Designed to draft naturally in outdoor installations with its exclusive low-profile design. Available with digital electronic ignition, or as a millivolt design. Energy-smart Raypak heaters consistently achieve the highest efficiency ratings. Your pool and spa is a long-term investment that you, your family and friends will enjoy year after year. Now, there’s an easier way to enjoy that investment more often, more reliably and more efficiently throughout the year… The Raypak pool and spa heater. Think about being able to use your pool or spa at the perfect comfort level even when Fall arrives… Or when the first chill of Winter is felt in the wind… Or in the Spring or Summer when evenings can turn chilly in a minute! Helping you get more enjoyment from your pool or spa is the smart idea behind the Raypak heaters.
Mini Swimming Pool Heat Pump for Above-Ground Pools Electric Pool Heater 110V.
Ideal for Above Ground Pools. The pool heat pump is designed for small pools with up to 2700 gallons of water. It is suitable for above-ground swimming pools, hot tubs or spas. Extend Your Swim Season. Nothing beats a warm swimming pool for your kids, pets and the whole family. What you’ll need is a highly efficient, low operating cost heating system. A pool heat pump for swimming pools will extend the fun for a few more months. The pool heater is a heat pump specifically designed for swimming pools. The operation only requires very limited electric input, thus its heat conversion rate can reach a score of COP 5.4. In other words, for every cent of electricity spent, 5.4 times heat is generated. Equipped with a powerful compressor, the pool heat pump has a capacity of 14331BTU/hr. The swimming pool heater is easy to operate, which allowing fast and easy hookup without professional installation. Just hook up several quick connectors, then plug and play. No need tools, no need plumber. High Quality and Safer. Available with the child lock and an advanced protection system which has auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. The pure titanium heat exchanger can resist any corrosion from pool water. An intelligent control system maintains the pool temperature at a consistent level. Mini Swimming Pool Heat Pump is specifically designed for mini swimming pools, not an solar or gas heater. The operation only requires very limited electric input, hence its high efficiency and the heat conversion rate can reach a score of COP. The solar pool heater is too dependent on weather conditions and the amount of sunlight, hence limiting its usage. Without enough sunlight, the solar heater cannot run efficiently. In contrast, Mini Pool Heat Pump is not affected by weather conditions and can be turned on anytime as long as outdoor temp. Is above 40F, so that your pool’s temperature can be adjusted whenever you want. Equipped with a powerful compressor, the pool heat pump has 2 kinds of capacity, A80.6W80.6 14331 BTU/hr and A56 W78.8 8496 BTU/hr. It also adds 4 way valve to help defrosting automatically. A Better Way to Extend Your Swimming Season — Mini Pool Heat Pump. In order to provide better service to buyers and improve our service quality, we interviewed hundreds of buyers who have used other companies’ swimming pool heat pumps and asked what problems they encountered during the use of heat pumps. Our machine has completely ruled out these problems, please rest assured to use. These questions are also to improve your understanding of the machine. You can contact me at any time if you have any questions after receiving our machine. 2 Install: Check if there is ventilation in the installation environment, there must be enough clearance around the machine for ventilation; connect the power supply, the voltage should be 110V, and see if the fan will turn; if the fan will turn, turn it on for 45 minutes continuously; the ambient temperature is not higher than 20 degrees, it will automatically frost 3 Unable to defrost is 1 You have to turn on the machine and check the fault code to see if the machine is operating normally, and the frosting should be automatically removed after the conditions are met; 2 Check if there is ventilation in the installation environment. There must be enough clearance around the machine for ventilation; connect the power supply and see if the fan will rotate; if the fan will rotate, start it for 45 minutes continuously; automatic cream. No change in temperature. 1 It needs to be covered with a pool cover (pool cover) to keep warm 2 The power of the circulating water pump should not be higher than 600GAL/hour, 530GAL/hour is recommended, and 400GAL/hour is the best 3 The capacity of the pool is 2700GAL, preferably within 2100GAL 4 The larger the pool capacity, the lower the temperature, the lower the humidity, and the worse the heating effect 5 When encountering this situation, it is generally necessary to know the capacity of the customer’s swimming pool, outdoor temperature, humidity, and the state where the customer is located. 6 The power supply voltage should be between 110-120V. (1) E08 code The filter water pump does not circulate with the water in the pool, and the water temperature probe only detects the water temperature in the titanium heat exchanger, and the water is low and quickly protected against high temperature; Treatment: first disconnect the machine from the power supply – connect the filter water pump, confirm that the filter water pump and the pool are running with water – connect the machine to 110V power supply, start the machine. 2.1 Check the power supply, whether it is connected to 110V or 220V power supply according to the requirements of the machine; 2.2 The power and flow of the circulating water pump should be used in accordance with the requirements of the machine nameplate and instructions; 2.3 There must be enough places around the place where the machine is installed to dissipate heat, and it cannot be blocked. If the machine is not heated, first check the fault code or panel display on the control panel; 2.4 If the machine is found to be frosted, check the air humidity and ambient temperature. The defrosting condition of the machine is that the machine should be powered on continuously for 45 minutes, the ambient temperature is within 20 degrees, and the air humidity is within 70%.
SwimEasy Lite utilizes the ultra high-performance SwimEasy solar collector, combined with a base set of hardware for connecting this panel to standard above-ground swimming pool systems; primarily flex hose style connections (either 1.25″ or 1.5″). Each kit includes new to market flex hose adapters specially designed to allow for a high performance connection from flex hose to solar collector without any threaded fittings or attachment points. These specialized adapters maximize flow through the system, using the same connection type found on premium inground systems. We have done all we can to create a high-performance package at the lowest costs possible for above ground pool system setups! Package includes the base set of hardware. Needed to connect the solar panel. Together, and make water connections to standard above ground flex hose. (intended for panels that are going to be laid on the ground near your pool). These parts include durable UV-resistant EPDM rubber couplings, stainless-steel hose clamps, and our new premium CPVC flex hose adapters. Package includes everything from the non-mounted package along with the materials needed to secure the panels to a roof or rack. This includes stainless steel header mounting brackets, strap brackets, a set of pipe adapters allowing the system to be connected to 1.5 PVC pipe, high-strength woven polyester body straps, and flashing bases for an enhanced seal at each mounting location, The roof mounted package also includes a. Vacuum relief valve to allow for automatic gravity drainage of the panels and piping. Introducing a revolutionary breakthrough to the swimming pool industry – specially designed adapters which provide a completely leak-free seal, whether you want to connect to flex hose or PVC pipe! All without the use of any threaded fittings. The SwimEasy solar collector is the perfect choice for those looking for a max heating performance. This panel has been used by installers across the country for decades for one simple reason; it works, and keeps on working. Each panel is built from high-grade materials proven to last in all types of weather and deliver long life expectancies. Each collector is thermally-welded and insert-molded. A direct, metered manifold delivers a balanced flow through the collector and prevents hot-spots. A tube-and-web design separates each individual round tube by a thin strip or “web”. This design allows for normal expansion and contraction while collecting more heat. It also minimizes the amount of heat lost from wind passing over the riser tubes. State of the Art Manufacturing. SwimEasy solar collectors are made in USA and undergo state-of-the-art manufacturing techniques designed to significantly increase the materials resistance to UV light. This process eliminates the inherent quality issues that plague cheaply manufactured products which typically see a lifespan of only 1-2 years. Each panel is manufactured from precompounded polypropylene with synergistic antioxidants and UV screen including carbon black. These special additives play a vital role in developing a panel capable of withstanding the harsh conditions of a rooftop, in all types of weather, for years to come. Each panel is put up against more than 40 quality control inspections throughout the entire manufacturing process to ensure the final product. Specially Designed Pipe Connectors. New to market adapters previously unavailable for above ground. These adapters use O-ring attachments for a secure, leak-free seal to PVC Pipe, Rubber Coupling Hoses, Valves & Flex Hose. Our goal was to bring the standards used for high pressure inground pool systems to the above ground market. These adapters allow for flex hose to be connected to our premium SwimEasy system. SwimEasy Lite’s specialized adapters will connect either 1.25″ or 1.5″ flex hose directly to the SwimEasy solar panel. (adapters to connect to 1.5 PVC pipe are also included with the roof mounted packages). STATE OF THE ART MANUFACTURING. SwimEasy solar panels undergo a state-of-the-art manufacturing process designed to significantly increase the materials resistance to UV light. Each absorber plate of a SwimEasy solar collector is made from a propylene copolymer with synergistic antioxidants and UV screen including carbon black. When these special additives are coupled with a process of melt-blending the plastic, the thermal characteristics are altered, substantially increasing the material’s resistance to UV light. This process is vital in creating a solar panel capable of withstanding the sun’s harsh conditions for years to come. For panels to last full life expectancy of 15-20 years, they should be installed on a sloped surface and plumbed in a manner that allows for automatic gravity drainage. Triple Threat comes with everything you need to allow for this functionality. Freeze damage must be avoided! This is accomplished by assuring no water is in the collectors when temperatures drop below 40 degrees Fahrenheit. “Not All Plastic Is Created Equal”. For details on the quality differences between the two primary types of resin blends. A rooftop is a harsh environment and it is not easy to produce a collector capable of withstanding its conditions for a sustained period of time, see why below. SwimEasy collectors are constructed in a “tube-and-web” design which separates each individual round tube by a thin strip or “web”. This design allows for normal expansion and contraction that occurs due to thermal heating and cooling, extending life expectancy. Each panel is comprised of 8 individual plates that are thermally-welded and insert-molded. NOT ALL PLASTIC IS CREATED EQUAL. Unmodified polypropylene has a high rate of degradation from UV exposure. Sunlight breaks down the plastic and weakens it, a serious problem for a solar collector as its very nature is to collect as much sunlight as possible. These special additives, coupled with state-of-the art manufacturing techniques, substantially increase the material’s resistance to UV light. These are vital components toward creating a collector able to withstand the harsh conditions of a roof-top for years to come. Products made from plastic typically start out as one-of-two types of resin blends. Masterbatch: Natural (clear) resin pellets are mixed with a concentrate during the extrusion process. This concentrate would contain additives and fillers used to affect the end-product’s physical appearance or properties. Precompounded: Compounding is a process of melt-blending plastics with other additives. This process alters the physical, thermal, or aesthetic characteristics of the plastic. Compounding starts with a base resin, which is blended with additives in an industrial mixer, producing a final resin ready for use in manufacturing. Additives are evenly distributed throughout the resin and subsequent end-products. The Ideal Choice if Your Looking For.. > A SIMPLE, DURABLE INSTALLATION. SwimEasy utilizes premium rubber couplings and stainless steel hose clamps to make secure connections. These components are by far the fastest & simplest method for attaching & securing a solar pool heating system. They offer more wiggle room during installation than propriety clamp style systems (for less hassle & faster assembly). > RELIABILITY & LONGEVITY. State-of-the-art manufacturing coupled with special additives merge to create a panel capable of withstanding the harsh conditions of a rooftop, in all types of weather, for up to 15-20 years. Constructed of 8 individual plates that are thermally-welded and insert-molded. Made from precompounded polypropylene, a process which increases the materials resistance to UV light (lengthens service life substantially). This manufacturing process eliminates the inherent quality issues that plague cheaply manufactured products which typically see a lifespan of only 1-2 years. > REPLACEMENT SOLAR PANEL OR SYSTEM. SwimEasy solar panels will replace any solar pool heater that has a round 1.5 I. Header manifold and makes connections with a rubber hose type connector. The header size is a measurement of the internal diameter. Please verify this size before ordering. It is the responsibility of the owner to assure the system is installed in a manner that allows for automatic gravity drainage of the panels & piping, drained of all water when temperatures are expected to drop below 40 degrees Fahrenheit, or connected to an automation system with freeze protection enabled. Molded EPDM rubber hoses designed specifically for use with solar pool heater panels. Used to connect solar panels to one another, attach end caps and vacuum relief valves. Durable UV-resistant EPDM rubber for long life in direct sun. Reinforced center prevents deformation from pressure and vacuum. Hose-clamp indicator ridges for perfect placement and seal. Only hoses made specifically for pool solar applications should be used for connecting solar pool panels or any necessary hardware. Rubber coupling hoses not designed for this purpose may balloon and explode under the high operating pressure of a solar pool heating system. Superior to Dacron; Polyester webbing strap is lightweight & durable. Superior to Steel: Steel strapping can damage collectors over time. High strength polyester keeps panels secure without rubbing into the exterior. Extruded polyester fibers are woven; will never fade or turn white like dyed fabric strap. Third party testing proves this polyester-weave web strapping to be equal in strength and durability to coated stainless steel. Will hold strong without damaging the solar panels. This is a base kit with water connection components only and doesn’t include mounting hardware to secure the panel to a mounting surface. Includes adapters to secure panels to either 1.25″ or 1.5″ above-ground swimming pool flex hose. Water will always be flowing through the solar panel when the pump is running. This kit doesn’t have a solar bypass to turn solar off. Full Breakdown – Included Parts. (1) SwimEasy Solar Panel – 4′x10. / 1.9 O. Panel Connector Hose – 3 3/4 long. (8) Hose Clamp, Stainless Steel. 1.9″ (1-7/8″) O. (2) Flex Hose To Rubber Coupling Hose Adapter. (Connects solar panels to 1.25″ or 1.5″ flex hose). (2) Hose Clamp, Stainless Steel. (1.25 Flex Hose). (1.5 Flex Hose). (2) End Cap. (2) SwimEasy Solar Panel – 4′x10. (12) Hose Clamp, Stainless Steel. This is a build on the base kit and includes the components for mounting the collectors to an installation surface (roof or rack). This package also contains the parts necessary for connecting to 1.5 SCH40 PVC pipe, as well as a vacuum relief valve to allow for automatic gravity drainage of the panels & piping. The parts included in this package are for connecting and mounting the selected number of panels in a single row. Includes adapters to secure panels to either 1.25″ or 1.5″ above-ground swimming pool flex hose, as well as adapters to connect with 1.5 SCH40 PVC pipe. Water will always be flowing through the solar system when the pump is running. 1-Panel / Roof-Rack Mounted. (2) CPVC Pipe Connectors – 1.9? (Connects solar panels to 1.5 SCH40 PVC Pipe). (2) Flex Hose To PVC Pipe Adapter. (Connects flex hose to 1.5 SCH40 PVC Pipe). (4) Hose Clamp, Stainless Steel. (1) Vacuum Relief Valve – 1.9? (2) Outlet Header Hold-Down Bracket Assembly. (2) Outlet Header Bracket Flashing Base. (4) Strap Bracket, Stainless Steel. (4) Strap Bracket Flashing Base. (2) Hold-Down Strap, High-Strength Woven Polyester – 65. (1) Drain Loop Assembly. (3) Outlet Header Hold-Down Bracket Assembly. (3) Outlet Header Bracket Flashing Base. (6) Strap Bracket, Stainless Steel. (6) Strap Bracket Flashing Base. (4) Strap Clamp, Stainless Steel. (2) Hold-Down Strap, High-Strength Woven Polyester – 130.
1000s of Everyday Products. Vehicle Parts & Accessories. Sign up to receive special insider notifications of our latest deals, promotions, and new listings! Fafco Papa Bear 24 Ft Solar Panel Heating Kit for Above Ground Pools (Open Box). Item is open box, unharmed and in very good condition. All accessories or parts are included with the item. Enjoy your pool and easily heat up your above-ground swimming pool with renewable energy. Every unit is inspected and tested; Made from stabilized polyolefins for a long life. Works with most above-ground pools, pumps, and filters; Starter kit included. FAFCO’s Connected Tube (CT) design is the most efficient solar panel available. A built-in manual control valve allows you to adjust the flow through the panel and how much heat is provided to your pool. Use household tools to connect fittings and hoses to your pool pump/filter. Dimensions (L x W x D): 264 x 48 x 3.75 inches. Product Condition: Open Box – Like new. Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! Sign Up for Our.