salt

85kBtu Titanium Salt Water Pool Heat Exchanger Same Side Ports 1 1/2 & 1 FPT

You may also like. 85,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas. Our innovative spiral twisted corrugated tube design is engineered to maximize solar or boiler energy, increasing the overall thermal efficiency of the system. We offer these pool heat exchangers with capacities ranging from 55kBtu to 6000kBtu, made from either Stainless Steel 316L or Titanium, and with either opposite- or same-side ports. This listing is for the titanium version. The Titanium version is highly recommended for salt water systems, as it is the only model that can withstand that kind of water. This model works with pools of up to 6,600 US gallons. With 85kBtu/hr at 140F temperature difference. Between inlet water and heated water. Heat salt water can up to 6,600 gallon 85 kBtu/hr—-based on 60°C (140°F) temperature difference between incoming heating and heated water. Compared with Stainless Material: Fully made of anti-corrosion 99.99% purity titanium and titanium filling material for welding. Prodcut Specifications and Design : 1 1/2″ FPT same side for pool water and 1″ FPT for hot water; Wattage: 25KW. Applications: Pool/Spa/Hot Tub Heating, Residential and Industrial Applications, Water Heating, Forced Air Heating Systems, Floor Heating, Snow Melting, Solar Hot Water Heating, Outdoor Wood Furnaces, Solar Pool Heating System. Capacity: 85,000 Btu/hr. Pool Capacity: 6,600 Gal. Heat Transfer Area: 2.702 ft2. Hot Water Flow Volume: 8.27 GPM. Hot Water Pressure Drop: 1.02psig. Cold Water Flow Volume: 56.22 GPM. Cold Water Pressure Drop: 1.28psig. Shell (Pool) / Tube (Hot) Connections: 1 1/2″ FPT / 1″ FPT. Residential and Industrial Applications. Forced Air Heating Systems. Solar Hot Water Heating. Solar Pool Heating System. Marine Engine Water Cooling. FAQ and Support: Tips for operation: For start-up, open the valves gradually to increase flow and pressure in the unit. Then let cold water into the system, followed by hot water. Be sure to check the connections for leaks. When you’re done using the heat exchanger, stop the hot water supply first and then the cold water supply. We have worked with heating systems for over 10 years and are happy to help you with any questions or concerns that you may have. If this is an issue for you, please let us know immediately so we can waive the requirement. We are also closed for major holidays. Titanium Pool Heat Exchanger 85kBtu Titanium Same Side 1 1/2″ and 1″ FPT High Heating Efficiency for Spa Heating and Mariculture! Item location: Zionsville, Indiana, United States. With over 10 years’ experience of working with heating systems, we at Alfa Heating Store have the skills and expertise to help you with your projects. We main sell the components needed for floor heating, domestic hot water heating, swimming pool heating, and other heating systems. We will also continue to increase the quality products provided by some quality suppliers, aiming to provide customers with better services and shopping experience. Our products come from our own factory and we keep our inventory in our warehouse in Pennsylvania. Check us out on Facebook at AlfaHeatingStore! This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “alfaheatingsupply” and is located in this country: US. This item can be shipped to United States, Canada.

BTUh Heating Rating: 85000 BTUh
Model: SP-85kti-S-2
Power Source: Gas / Wood / Solar / Heat Pump / Electricity, Coal, Electric
Type: Pool heat exchanger
MPN: SP-85Kti-S-2
Material: Titanium
Maximum Pool Size: 6,600 U.S. Gallon
C-C Distance: 12.7\
Connection Size (Hot / Pool): 1 1/2\
Brand: AB
Heating System: Boiler

Shell & Tube Heat Exchanger For Swimming Pool Spas Salt Water Heat Exchange

What’s Included: 1 X Stainless Steel Heat Exchanger 2 X Fixed Bracket Weights&Dimensions Packing Size: 541919cm Weight: 5.2kg Specifications : Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Same Side Port: 1 1/2″ Fpt. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Product Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 11.5lbs(5.2kg). Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 4.8 square feet. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “deerdeerd” and is located in this country: US. This item can be shipped to United States.

BTUh Heating Rating: 200 kBtu
Suitable For: Hot Tubs
Type: ppol heat exchanger
Brand: Unbranded
Material: 304 stainless steel
Same Side Ports: 1 1/2\
Weight: 11.5lbs(5.2kg)
Power Source: Gas / Wood / Solar / Heat Pump / Electricity
Output: 200 kBtu/hour
Hot Water flow rate: 30 L/min
Cold water flow: 250 L/min
Side of hot water pipe: 1\
Country/Region of Manufacture: China
Heat transfer area: 4.8 square feet
Packing size: 54*19*19cm

Spa Pool Heater Salt Pond Stainless Steel Heat Exchanger Ports 1 1/2 & 1FPT

Features: Material: 304 stainless steel Output: 200 kBtu/hour Heat transfer area: 4.8 square feet Hot water flow rate: 30 L/min Cold water flow: 250 L/min Side of hot water pipe: 1″ FPT Opposite side port: 1 1/2″ FPT Packing size: 541919cm Weight: 5.2kg The package includes: 1 x stainless steel heat exchanger 2 x fixed bracket. Spa Pool Heater Salt Pond Stainless Steel Heat Exchanger Ports 1 1/2″ & 1″FPT. The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. The opposite side of the pool water is 1 1/2″ FPT, and the hot water is 1″ FPT. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Heat transfer area: 4.8 square feet. Hot water flow rate: 30 L/min. Cold water flow: 250 L/min. Side of hot water pipe: 1 FPT. Opposite side port: 1 1/2 FPT. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “scchen8″ and is located in this country: US. This item can be shipped to United States.

Item location: CA /NJ /Austell
Brand: Unbranded
Material: 304 stainless steel
Output:: 200 kBtu/hour
Heat transfer area: 4.8 square feet
Hot water flow rate: 30 L/min
Cold water flow: 250L/min
Side of hot water pipe: 1\
Opposite side port: 1 1/2\
Packing size: 54*19*19cm
Weight: 5.2kg
Water Temperature Range: as description show
Suitable For: as description show
Power Source: as description show
Voltage: as description show
Amperage: as description show
Features: as description show
BTUh Heating Rating: as description show
Energy Star: as description show
Heating System: as description show
Power: as description show
Tank Capacity: as description show

Swimming Pool Heat Exchanger Salt Pond Shell-and-tube Heat Exchanger Stainless

Features: Material: 304 stainless steel Output: 200 kBtu/hour Heat transfer area: 4.8 square feet Hot water flow rate: 30 L/min Cold water flow: 250 L/min Side of hot water pipe: 1″ FPT Opposite side port: 1 1/2″ FPT Packing size: 541919cm Weight: 5.2kg The package includes: 1 x stainless steel heat exchanger 2 x fixed bracket. Swimming Pool Heat Exchanger Salt Pond Shell-and-tube Heat Exchanger Stainless. The Swimming Pool Heat Exchanger Is Made of High-grade Anti-corrosion Stainless Steel, Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Opposite Side of the Pool Water Is 1 1/2″ Fpt, and the Hot Water Is 1″ Fpt. The Salt Pond Heat Exchanger Adopts an Innovative In-line Design to Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. The Shell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water, and Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Opposite Side Port: 1 1/2″ Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “qwery7″ and is located in this country: US. This item can be shipped to United States.

Item location: CA /NJ /Austell
Brand: Unbranded
Material: 304 stainless steel
Output:: 200 kBtu/hour
Heat transfer area: 4.8 square feet
Hot water flow rate: 30 L/min
Cold water flow: 250L/min
Side of hot water pipe: 1\
Opposite side port: 1 1/2\
Packing size: 54*19*19cm
Weight: 5.2kg
Power Source: Solar
Suitable For: Hot Tubs
BTUh Heating Rating: 200 kBtu/hour
Heating System: Boiler
Energy Star: 5 Stars
Water Temperature Range: 60°C (140°F)

200KBTU Heat Exchanger 1 +1 1/2 FPT for Salt Water Swimming Pool Spa SS304 NEW

The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT 304 Stainless Steel USA. The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Great Durability: The heat exchanger is made of 304 stainless steel, which is durable and has a long service time. Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating: It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. Safe to Use: It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. More Water-saving: It does not waste water during operation and tries to make the best use of every drop of water, so it is more water-saving. Easy to Clean: You can easily clean it without much effort and time because of its smooth surface and fewer gaps. Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc. Threaded Connection Ports: The heat exchanger has four threaded connections ports that can connect other tubes more firmly and tightly, which is uneasy to fall off and affect the heat transfer. 304 Stainless Steel: The heat exchanger is made of 304stainless steel so that it is rustproof and saltwater resistant. Therefore, it is suitable for chlorine or saltwater pools and spas. It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 Stainless Steel. Heat Transfer Area: 0.45m²/4.8ft². Hot Water Flow Rate: 30L/Min (8L/Min). Cold Water Flow: 250L/Min (66L/Min). Side of Hot Water Pipe: 1inch FPT. Same Side Port: 1 1/2 FPT. Packing Size: 541919cm/217.57.5inch. Product Size: 6014cm/23.65.5inch. Connection Port Diameter: 3.8cm/1.5inch, 2.54cm/1inch. Weight: 5.2kg/11.5lbs. The product needs basic assembly. Professional would be highly recommended. 1 x Stainless Steel Heat Exchanger. 2 Sets x Fixed Brackets. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Convenient Use, Unique Appearance, Reliable Quality. Gas / Wood / Solar / Heat Pump / Electricity. For chlorine or salt water swimming pools and spas. Hot Water flow rate. 11.5lbs(5.2kg). Side of hot water pipe. 4.8 square feet. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “yiyibushe-4″ and is located in this country: US. This item can be shipped to United States.

Features: ★Trouble-free Installation★
Fetures: ★Good Quality Guarantee★
BTUh Heating Rating: 200 kBtu/hr
Power Source: Gas / Wood / Solar / Heat Pump / Electricity
Custom Bundle: No
Packing size: 54*19*19cm
Suitable For: for chlorine or salt water swimming pools and spas
Tank Capacity: /
Water Connection Location: /
Output: 200 kBtu/hour
Voltage: /
Amperage: /
Manufacturer: 200KBTU Heat Exchanger
Water Temperature Range: 60°C (140°F)
Hot Water flow rate: 30 L/min
Same Side Ports: 1 1/2\
Material: 304 stainless steel
Weight: 11.5lbs(5.2kg)
Side of hot water pipe: 1\
Brand: Unbranded
Cold water flow: 250 L/min
Type: ppol heat exchanger
Heating System: heat exchanger
Model: /
Heat transfer area: 4.8 square feet
Country/Region of Manufacture: China
Power: /
Item Width: 7.5inch
Item Height: 7.5inch
Item Length: 21inch

135 kBtu Shell & Tube Heat Exchanger for Salt Water/Pools/spas 1+ 1 1/2FPT USA

Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. 135 kBtu Shell & Tube Heat Exchanger for Salt Water/Pools/spas 1″+ 1 1/2″FPT USA. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “wilknet” and is located in this country: US. This item can be shipped to United States.

Cold Water Flow: 200 L/min
Same Side Port: 3.81cm/1.5in FPT
Output: 135 KBtu/Hour
Material: 304 Stainless Steel
Side of Hot Water Pipe: 2.54cm/1in FPT
Packing Size: 40*19*19cm/15.75*7.48*7.48in
Heat Transfer Area: 3.2ft²
Item Weight: 3.4kg/7.5lbs
Hot Water Flow Rate: 25 L/min
Product Size: 33*14cm/13*5.5in
Suitable For: POOL
BTUh Heating Rating: 135 kBtu/hour
Heating System: immediately heating
Features: innovative in-line design
Water Temperature Range: 140°F temperature difference
Type: Pool Heat Exchanger
Brand: Unbranded
Same Side Ports: 1 1/2\
Power Source: Gas / Wood / Solar / Heat Pump / Electricity
Country/Region of Manufacture: China

Stainless Steel Salt Pond Heat Exchanger Recovery Pool Heater With 2 Fixed Bracket

Features: Material: 304 stainless steel Output: 200 kBtu/hour Heat transfer area: 4.8 square feet Hot water flow rate: 30 L/min Cold water flow: 250 L/min Side of hot water pipe: 1″ FPT Opposite side port: 1 1/2″ FPT Packing size: 541919cm Weight: 5.2kg The package includes: 1 x stainless steel heat exchanger 2 x fixed bracket. Stainless Steel Salt Pond Heat Exchanger Recovery Pool Heater W/ 2 Fixed Bracket. The Swimming Pool Heat Exchanger Is Made of High-grade Anti-corrosion Stainless Steel, Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Opposite Side of the Pool Water Is 1 1/2″ Fpt, and the Hot Water Is 1″ Fpt. The Salt Pond Heat Exchanger Adopts an Innovative In-line Design to Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. The Shell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water, and Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. The Package Includes: 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Opposite Side Port: 1 1/2″ Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “best_item_here” and is located in this country: US. This item can be shipped to United States.

Item location: CA /NJ /Austell
Brand: Unbranded
Material: 304 stainless steel
Output:: 200 kBtu/hour
Heat transfer area: 4.8 square feet
Hot water flow rate: 30 L/min
Cold water flow: 250L/min
Side of hot water pipe: 1\
Opposite side port: 1 1/2\
Packing size: 54*19*19cm
Weight: 5.2kg
Power Source: Solar
Suitable For: Hot Tubs
BTUh Heating Rating: 200 kBtu/hour
Heating System: Boiler
Energy Star: 5 Stars
Water Temperature Range: 60°C (140°F)

200kBtu Swimming Pool Heat Exchanger Chlorine or Salt Water Pool Heater 1 1/2Fpt

Features: Material: 304 stainless steel Output: 200 kBtu/hour Heat transfer area: 4.8 square feet Hot water flow rate: 30 L/min Cold water flow: 250 L/min Side of hot water pipe: 1″ FPT Opposite side port: 1 1/2″ FPT Packing size: 541919cm Weight: 5.2kg The package includes: 1 x stainless steel heat exchanger 2 x fixed bracket. 200kBtu Swimming Pool Heat Exchanger Chlorine or Salt Water Pool Heater 1 1/2Fpt. The Swimming Pool Heat Exchanger Is Made of High-grade Anti-corrosion Stainless Steel, Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Opposite Side of the Pool Water Is 1 1/2″ Fpt, and the Hot Water Is 1″ Fpt. The Salt Pond Heat Exchanger Adopts an Innovative In-line Design to Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. The Shell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water, and Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Opposite Side Port: 1 1/2″ Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “abusheshop” and is located in this country: US. This item can be shipped to United States.

Item location: CA /NJ /Austell
Brand: Unbranded
Material: 304 stainless steel
Output:: 200 kBtu/hour
Heat transfer area: 4.8 square feet
Hot water flow rate: 30 L/min
Cold water flow: 250L/min
Side of hot water pipe: 1\
Opposite side port: 1 1/2\
Packing size: 54*19*19cm
Weight: 5.2kg
Power Source: Solar
Suitable For: Hot Tubs
BTUh Heating Rating: 200 kBtu/hour
Heating System: Boiler
Energy Star: 5 Stars
Water Temperature Range: 60°C (140°F)

AutoPilot ChlorSync CS30 Salt Chlorinator, ECP0312 + ECP0343 + CS30, Pool Pilot

Introducing the new ChlorSync. Salt Chlorine Generator by AutoPilot. This high-tech line comes packed with features that make maintaining your pool a breeze. We offer 3 cell sizes, for pools up to 50,000 gallons/189 m. To fit your needs. The ChlorSync system is simple to install, operate and service, offers automatic cell model detection, 24-hour boost cycle, and automatic cover connection capability. You can view the current salt level and water temperature, see how much salt to add, when needed, and receive alerts should the unit need any attention. Power Center ECP0312, along with your choice of the cell CS30, CS40, or CS50. Also included in this system is the. You will be able to. Control the system through the PoolSync. Patented temperature compensation. Simple installation and service. Automatic model detection. 24-hour boost detection. Get advanced functionality when paired with the PoolSync. 110v or 220v, 50 or 60Hz. ChlorSync® Power Center and Manual. 11.4″ x 6″ x 5.2. 12.7″ x 7.75″ x 7.75. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “mackepoolproducts” and is located in this country: US. This item can be shipped to United States.

UPC: 0690449055947
Brand: AquaCal
Type: WiFi Controller
Power Source: Electric
MPN: ECP0343