1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


1,200,000 BTU Titanium Tube and Shell. GPM Boiler Side – 30.19. GPM Pool Side – 224.06. Boiler Ports – 2 NPT. Pool Ports – 2 1/2 NPT. Port to Port – 35 13/16. Diameter – 5 1/8. Length – 34 13/16. Number of Tubes – 84. PSI Drop Hot – 2.21. PSI Drop Cold – 4.05. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 103,200 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 2″ – (to/from Pool) 2 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 salt, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitation’s and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate; 2. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product.

360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


360,000 BTU Titanium Tube and Shell. Swimming pools, spas heating. BTU rated with 180F Boiler and 80F Pool. Port to Port – 27 13/16. Hot tube heating. Nominal values are based on 60°C temperature between incoming heating and heated water.

600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss


600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss



600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss. 600,000 BTU Titanium Tube and Shell Same Side Ports GPM Boiler Side – 17.44 GPM Pool Side – 114.16 Boiler Ports – 2″ NPT Pool Ports – 21/2″ NPT Port to Port -25 3/8″ Diameter – 4 3/8″ Length – 33 1/2 Number of Tubes – 42 PSI Drop Hot – 1.22 PSI Drop Cold – 3.07 Working Pressure – 80 PSI BTU rated with 180F Boiler and 80F Pool This unit is suitable for pools/spas that are 51,600 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 2″ – (to/from Pool) 2 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precaustions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 sat, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitations and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;2. Nominal values are based on 60°C temperature between incoming heating and heated water. Typical residential application: – Swimming pools, spas heating- Hot tube heating- Floor heating- Driveway snowmelts Typical industrial application: – Oil cooling or heating- Steam condenser- District heating- Transmission and engine cooler- Boiler sample cooler- Waste water heat recovery- Industry process applications IMPORTANT!! It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. 600,000 BTU Titanium Tube and Shell. GPM Boiler Side – 17.44. GPM Pool Side – 114.16. Boiler Ports – 2 NPT. Pool Ports – 21/2 NPT. Port to Port -25 3/8. Diameter – 4 3/8. Length – 33 1/2. Number of Tubes – 42. PSI Drop Hot – 1.22. PSI Drop Cold – 3.07. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 51,600 gallons. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in this country: US. This item can be shipped worldwide.

  • Brand: Badgerpipe
135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT


135k BTU Tube and Shell Heat Exchanger for Saltwater Pools/Spas 1+ 1 1/2FPT



Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Welcome to Our Store. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “widesupplier999″ and is located in this country: US. This item can be shipped to United States.

  • Cold Water Flow: 200 L/min
  • Same Side Port: 3.81cm/1.5in FPT
  • Output: 135 KBtu/Hour
  • Material: 304 Stainless Steel
  • Side of Hot Water Pipe: 2.54cm/1in FPT
  • Packing Size: 40*19*19cm/15.75*7.48*7.48in
  • Heat Transfer Area: 3.2ft²
  • Item Weight: 3.4kg/7.5lbs
  • Hot Water Flow Rate: 25 L/min
  • Product Size: 33*14cm/13*5.5in
  • Suitable For: POOL
  • BTUh Heating Rating: 135 kBtu/hour
  • Heating System: immediately heating
  • Features: innovative in-line design
  • Water Temperature Range: 140°F temperature difference
  • Type: Pool Heat Exchanger
  • Brand: Unbranded
  • Same Side Ports: 1 1/2\
  • Power Source: Gas / Wood / Solar / Heat Pump / Electricity
  • Country/Region of Manufacture: China
Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt


Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt



You may also like. Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2″+1 1/2″FPT Snow Melt. Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2″ and 1 1/2″ FPT High Heating Efficiency for Hot Tub, Spa, and Pool Heating! Spiral twisted corrugated tube. Design is engineered to maximize solar or boiler energy. Increasing the overall thermal efficiency. We offer these tube & shell heat exchangers with capacities ranging from 55kBtu to 6000kBtu, made from either Stainless Steel 316L or Titanium, and with either opposite- or same-side ports. This listing is for the Titanium version. The Titanium version is highly recommended for salt water systems, as it is the only model that can withstand that kind of water. This model works with pools of up to 23,800 US gallons with 300kBtu/hr. At 140F temperature difference. Between inlet water and heated water. Applications of Titanium Saltwater Heat Exchanger. Residential and Industrial Applications. Forced Air Heating Systems. Solar Hot Water Heating. FAQ and Support: Tips for operation: For start-up, open the valves gradually to increase flow and pressure in the unit. Then let cold water into the system, followed by hot water. Be sure to check the connections for leaks. When you’re done using the heat exchanger, stop the hot water supply first and then the cold water supply. We have worked with heating systems for over 10 years and are happy to help you with any questions or concerns that you may have. For help with your heating projects. If this is an issue for you, please let us know immediately so we can waive the requirement. We are also closed for major holidays. Item location: Zionsville, Indiana, United States. With over 10 years’ experience of working with heating systems, we at Alfa Heating Store have the skills and expertise to help you with your projects. We main sell the components needed for floor heating, domestic hot water heating, swimming pool heating, and other heating systems. We will also continue to increase the quality products provided by some quality suppliers, aiming to provide customers with better services and shopping experience. Our products come from our own factory and we keep our inventory in our warehouse in Pennsylvania. Check us out on Facebook at AlfaHeatingStore! The item “Titanium Saltwater Heat Exchanger 300kBtu Opposite Side 2+1 1/2FPT Snow Melt” is in sale since Thursday, April 25, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “alfaheatingsupply” and is located in Lancaster, Pennsylvania. This item can be shipped worldwide.

  • Connection Size (Hot / Pool): 1.5″ / 2″ FPT
  • MPN: SP-300Kti
  • BTUh Heating Rating: 300000btu
  • C-C Distance: 23″
  • Suitable For: Hot Tubs
  • Power Source: Gas / Wood / Solar / Heat Pump / Electric
  • Material: Titanium
  • Model: SP-300Kti
  • Heating System: Boiler
  • Brand: AB
  • Maximum Pool Size: 23,800 U.S. Gallon
  • Type: pool heat exchanger
155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os


155,000 BTU Titanium Tube and Shell. GPM Boiler Side 8.46. GPM Pool Side 62.66. Boiler Ports – 1 NPT. Pool Ports – 1 1/2 NPT. Port to Port – 9 1/8. Number of Tubes – 30. PSI Drop Hot 1.10. PSI Drop Cold 1.58. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 13,330 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 1″ – (to/from Pool) 1 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precaustions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 sat, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitations and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “155k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas os” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807256607
  • Type: Heat Exchanger
Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture


You may also like. Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2″ / 1″ FPT Mariculture. Saltwater Heat Exchanger 55kBtu Titanium Same Side 1 1/2″ and 1″ FPT High Heating Efficiency for Pool & Spa Heating! Our innovative spiral twisted corrugated tube design is engineered to maximize solar or boiler energy, increasing the overall thermal efficiency of the system. We offer these heat exchangers with capacities ranging from 55kBtu to 6000kBtu, made from either Stainless Steel 316L or Titanium, and with either opposite- or same-side ports. This listing is for the titanium version. The Titanium version is highly recommended for salt water systems, as it is the only model that can withstand that kind of water. This model works with pools of up to 3,960 US gallons with 55kBtu/hr at 140F temperature difference. Between inlet water and heated water. Applications of Saltwater Heat Exchanger. Residential and Industrial Applications. Forced Air Heating Systems. Solar Hot Water Heating. FAQ and Support: Tips for operation: For start-up, open the valves gradually to increase flow and pressure in the unit. Then let cold water into the system, followed by hot water. Be sure to check the connections for leaks. When you’re done using the heat exchanger, stop the hot water supply first and then the cold water supply. We have worked with heating systems for over 10 years and are happy to help you with any questions or concerns that you may have. If this is an issue for you, please let us know immediately so we can waive the requirement. We are also closed for major holidays. Item location: Zionsville, Indiana, United States. With over 10 years’ experience of working with heating systems, we at Alfa Heating Store have the skills and expertise to help you with your projects. We main sell the components needed for floor heating, domestic hot water heating, swimming pool heating, and other heating systems. We will also continue to increase the quality products provided by some quality suppliers, aiming to provide customers with better services and shopping experience. Our products come from our own factory and we keep our inventory in our warehouse in Pennsylvania. Check us out on Facebook at AlfaHeatingStore! The item “Saltwater Heat Exchanger Titanium 55kBtu Same Side 1 1/2 / 1 FPT Mariculture” is in sale since Thursday, April 25, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “alfaheatingsupply” and is located in Lancaster, Pennsylvania. This item can be shipped to United States, Canada.

  • Connection Size (Hot / Pool): 1 1/2″ / 1″ FPT
  • MPN: SP-55Kti-S-2
  • BTUh Heating Rating: 55000btu
  • C-C Distance: 6.4″
  • Suitable For: Hot Tubs
  • Power Source: Gas / Wood / Solar / Heat Pump / Electricity
  • Material: Titanium
  • Model: SP-55Kti-S-2
  • Brand: AB
  • Maximum Pool Size: 3,960 U.S. Gallons
  • Type: pool heat exchanger
210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


210,000 BTU Titanium Tube and Shell. GPM Boiler Side 9.13. GPM Pool Side 63.94. Boiler Ports 11/2 NPT. Pool Ports – 1 1/2 NPT. Port to Port – 13 1/4. Number of Tubes – 30. PSI Drop Cold 1.06. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 18,060 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 1 1/2″ – (to/from Pool) 1 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precaustions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 sat, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitations and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate; – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “210k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Undisclosed
  • MPN: Does not apply
1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss


1,200,000 BTU Titanium Tube and Shell. GPM Boiler Side – 30.19. GPM Pool Side – 224.06. Boiler Ports – 2 NPT. Pool Ports – 2 1/2 NPT. Port to Port – 35 13/16. Diameter – 5 1/8. Length – 34 13/16. Number of Tubes – 84. PSI Drop Hot – 2.21. PSI Drop Cold – 4.05. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 103,200 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 2″ – (to/from Pool) 2 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precaustions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 salt, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitations and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate; 2. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “1200k BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spas ss” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807256577