Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 3.81cm/1.5in FPT. Side of Hot Water Pipe. 401919cm/15.757.487.48in. Hot Water Flow Rate. Gas / Wood / Solar / Heat Pump / Electricity.
110V Heat Pump Swimming Pool Heat Pump For Above-Ground Pools Heating Pumps. 14331 BTU Heat Pump quietly and economically maintains ideal water temperature at all times. Ideal for coastal environments. S corrosion-resistant design is equipped with a unique Ultra Gold evaporator fin and titanium heat exchanger for extreme equipment durability. Its compact design allows for easy installation and service on new or existing pools. Is specially designed for small pools of up to 4000 gallons. Available with the child lock and an advanced protection system which has auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. It’s your perfect heat pump solution for above ground swimming pools, hot tub or spas. An intelligent temperature control system helps to maintain a warm and comfortable temperature so that you can extend the fun of swimming for a few more months! With the child lock and an advanced protection system. It utilizes a powerful compressor and a highly efficient fan system, equipped with a defrost function (single heat model), strong wind power, silent, and energy saving. Our heat pump casing is made of galvanized alloy material instead of plastic, and the outer layer is coated with a special anti rust coating that is baked at high temperatures. Avoiding the disadvantage of plastic casing being prone to powdering and becoming brittle outdoors for a long time, it is more durable and has a longer service life. Rubber anti slip rubber pad? 0.78 Anti Slip Pad can protect your counter from scratches. For the sturdy character, you don’t need. To worry that the sponge holder would slide down when the sink or counter top fill swith water. The mini pool heat pump is specially designed for small pools of up to 4000 gallons. It is suitable for above-ground swimming pools, hot tubs or spas. ?? Ideal Choice for Above Ground Pools? The mini pool heat pump is specially designed for small pools of up to 4000 gallons. ?? Energy Save? The pool heater based on professional technology. The operation only requires very limited electric input, thus its heat conversion rate can reach a score of COP 5.4. In other words, for every cent of electricity spent, 5.4 times heat is generated! ?? Convenient Assembly? It allows fast and easy hookup without professional installation, just hook up several quick connectors, then plug and play. 110V, 60Hz for USA electricity and built in 8 foot long power cable with standard USA plug. ?? Premium Security? Available with the child lock and an advanced protection system which has auto electrical leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. ?? Premium? Equipped with a powerful compressor, the pool heat pump has 2 kinds of capacity, A80.6W80.6 14331 BTU/hr and A56 W78.8 8496 BTU/hr. The pure titanium heat exchanger can resist any corrosion from pool water. An intelligent control system maintains the pool temperature at a consistent level. It also adds 4 way valve to help defrosting automatically. Heating performance suitable for 4000GAL swimming pools. Performance at Air 80 ° F, Water Heated to 80 ° F, Relative Humidity 80%. Rated heating capacity: 14331 BTU/hr. Rated input power: 0.65 kW. Rated COP: 5.4 W/W. Rated/maximum current: 7.5/8 A. Suggested water flow rate: 530GPH. Performance at Air 59°F, Water Heated to 78.8°F, Relative Humidity 70%. Heating capacity:2.49 kW(8496 BTU) Power consumption:0.64 kW C. Heating performance suitable for 2650GAL swimming pools. Rated heating capacity: 11800 BTU/hr. Rated COP: 4.5 W/W. Rated/maximum current: 5/6.5 A. Suggested water flow rate: 400-530GPH. Performance at Air 59 ° F, Water Heated to 78.8 ° F, Relative Humidity 70%. Heating capacity: 2.1 kW. Power consumption: 0.64 kW (2184 BTU). Images from different perspectives. GTHP035HSPmn Heating capacity(A80.6W80.6): 14331BTU Heating capacity(A56W78.8): 8496BTU Rated power input: 0.65KW Rated current: 7.5A COPat A27/W27:4.5W/W Power supply:110-120V/60Hz/1Ph Noise10m/1m:43dB(A)/52dB(A) Water connection:32or38mm Advised water flow. Water proof class:IPX4 Max. Discharge pressure:4.2MPa Min. 1MPa Water pressure drop:15kPa Refrigerant:R410A(0.45kg) GWPvale:2088 CO2 equivalent:0.80tonnes WeightNet/Gross: 21/24kg. Water Hose Connection: ø 32-35 mm. 2X Water pipe fixed connector. You need to confirm your water pump, and the advised water flow of our mini heat pump is 400530GPH. If the water pump flow is too large and the water circulation is too fast, the heat pump will not have enough time to heat the water. You can use a diverter valve kit to divert and limit the flow. When the pump works properly, there is a temperature difference between the fan outlet and the back air inlet, and also a temperature difference between the water inlet and the outlet It is recommended to use an ordinary swimming pool cover or a solar swimming pool cover for heat preservation If you want your pool’s temperature to rise quickly. The machine must be operated with 110V/60HZ US voltage, and the water pump and heat pump must be running at the same time. Please allow the machine enough place to dissipate heat and avoid blocking. If the machine is not heated, first check the fault code or panel display on the control panel. If the machine is found to be frosted and frozen, check the air humidity and ambient temperature. The defrosting condition of the machine is that the machine should be powered on continuously for 45 minutes, the surrounding temperature is within 68ºF, and the air humidity is within 70%. Automatic defrosting is possible under this condition. The recommended swimming pool capacity of the machine is below 4000GAL.
Product description:? The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used for one side of the swimming pool water and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr. It gets hot immedi. Stainless Steel Heat Exchanger Swimming Pool Heating System 135 kBtu/hour. The Pool Heat Exchanger Is Made of 304 Stainless Steel That Has Good Rust and Salty Water Resistance, so It Is More Durable and Has a Long Service Life. The Pool Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Incoming Water and the Hot Water, Delivering 135 Kbtu of Heat in One Hour, so It Is of High Efficiency. The Pool Heat Exchanger Uses an Innovative Spiral-wound Design to Ensure a Constant Temperature. It Is Very Suitable for Pools, Spas, Hot Tubs, Solar Energy, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. The Pool Heat Exchanger Is Made of 304 Stainless Steel That Has Good Rust and Salty Water Resistance, so It Is More Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Pool Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Incoming Water and the Hot Water, Delivers 135 Kbtu of Heat in One Hour, so It Is of High Efficiency. It Transfers Heat Indirectly Between Any Hot Water Circuit, Steam Circuit, and Any Pool or Spa Facility. With an Output of 135 Kbtu per Hour, This Pool Heat Exchanger Ensures the Pool Gets Hot Quickly Without Waiting, Saving Your Time and Energy. This Heat Exchanger Is a Non-storage Type, Where the Hot and Cold Fluids Have Separate Channels and Do Not Mix with Each Other. This Design Ensures That the Water Source Is Clean and Free of Contamination. Because of Its Smooth Surface and Few Crevices, It Can Be Easily Cleaned with a Damp Cloth Without Much Effort and Time. We Will Reply and Solve the Problem for You As Soon As Possible. The Spiral Wound Design of the Pool Heat Exchanger Effectively Ensures the Constant Temperature When Working. The Pool Heat Exchanger Is Made of 304 Food-grade Stainless Steel That Is Healthy to Use. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/Min. Cold Water Flow: 200 L/Min. Side of Hot Water Pipe: 2.54cm/1in Fpt. Same Side Port: 3.81cm/1.5in Fpt. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. 1 Stainless Steel Heat Exchanger. 1 1/2″ Fpt Is Used for One Side of the Pool Water and 1″ Fpt Is Used for Hot Water. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 3.2 square feet. 40 x 19 x 19cm.
Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger Description: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. What’s Included: 1 Stainless Steel Heat Exchanger 2 Fixed Brackets Features&Highlights: High Durability: The pool heat exch. Stainless Steel Water Heating System Tube Heater Exchanger Swimming Pool Equip. Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Product description:? The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used for one side of the swimming pool water and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr. It gets hot immedi.
Description The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Key Features Great Durability Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc.
Description The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Key Features Great Durability Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc.
