What’s Included: 1 X Stainless Steel Heat Exchanger 2 X Fixed Bracket Weights&Dimensions Packing Size: 48.514cm/19.095.5inch Weight: 5.2kg Specifications : Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Same Side Port: 1 1/2″ Fpt. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT Stainless Steel. Swimming Pool Heat Exchanger Tube Shell Heat Exchanger 1″+ 1 1/2″FPT 200KBTU. The Swimming Pool Heat Exchanger Is Made of Stainless Steel, so It Is Very Sturdy and Very Suitable for Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The heat exchanger is made of 304 stainless steel so that it is rustproof and saltwater resistant, which is durable and has a long service time. It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. Therefore, it is suitable for chlorine or saltwater pools and spas. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Packing Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. The Shell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water, and Can Provide a Fresh Pond of 200 Kbtu/Hr. The Heat Recovery Pool Heater Is Very Suitable for Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. Excellent Heat Conduction Design. The Salt Pond Heat Exchanger Adopts an Innovative In-line Design to Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
