3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


3,600,000 BTU Stainless Steel Tube and Shell. GPM Boiler Side 98.13. GPM Pool Side 672.19. Boiler Ports 2 1/2 NPT. Pool Ports – 4 NPT. Number of Tubes 171. PSI Drop Hot 9.52. PSI Drop Cold 10.32. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 309,600 gallons. These heat exchangers are constructed with a stainless steel 316L shell and stainless steel 316L corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 2 1/2″ – (to/from Pool) 4″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Stainless Steel Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Stainless Steel Pool and Spa Heat Exchangers are not suited for saline or salt water environments. For those applications please use one of our Titanium units. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers. Hydrochloric Acid up to 0.1% concentration. Solutions the contain MCI. Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation). Any fluid that will deposit alkaline residue or phosphorous. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “3,600,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807272454
1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os


1,200,000 BTU Stainless Steel Tube and Shell. GPM Boiler Side – 30.19. GPM Pool Side – 224.06. Boiler Ports – 2 NPT. Pool Ports – 2 1/2 NPT. Port to Port – 25 13/16. Diameter – 5 1/8. Length – 34 13/16. Number of Tubes – 84. PSI Drop Hot – 2.21. PSI Drop Cold – 4.05. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 103,200 gallons. These heat exchangers are constructed with a stainless steel 316L shell and stainless steel 316L corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 2″ – (to/from Pool) 2 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Stainless Steel Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Stainless Steel Pool and Spa Heat Exchangers are not suited for saline or salt water environments. For those applications please use one of our Titanium units. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate; 2. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers. Hydrochloric Acid up to 0.1% concentration. Solutions the contain MCI. Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation). Any fluid that will deposit alkaline residue or phosphorous. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “1,200,000 BTU Stainless Steel Tube & Shell Heat Exchanger for Pools/Spas os” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807272768
Vacuum Tube Solar Pool Water Heater with Stand


Duda Solar Pool Collectors. 58mm x 1800mm Vacuum Tubes. Solar water pool collectors are unpressurized solar collectors meant to heat the pool water directly. Cold water enters into the manifold from the pool, sinks to the bottom of the tube, and once heated a little bit, will rise back up to the top of the manifold and exit with the water flow. Pool collectors are the most efficient way to heat water because they come in direct contact with the heated surface in the tube and operate at low temperatures which will allow for minimal heat loss through the tubes and manifold, if any at all. These solar collectors have an inner manifold material made of 316L stainless steel. 316L stainless steel helps hold up against chlorinated water better than other metals, and typically lasts for about 15 years under normal usage, depending on how much chlorine content is present. When the manifold begins to leak due to failure from corrosion, the manifold can be replaced with a new one and the system may continue to be used. Extra tubes that make it unbroken may be kept by the customer as spares free of charge. Because pool collectors fill directly with the working water, they are not winter resistant. They can survive some freezing temperatures, but should be taken apart or drained and covered during non-use seasons. Tubes which are left dry in the sun cannot be filled with water while they are hot or they will suddenly burst due to rapid cooling caused by water. We recommend using these collectors with a controller and pump. When a controller is present, the water can be circulated to collect the heat. This is the most efficient method. Alternatively, a timer setting can be used to run the pump when the sun is out. Or the pool pump which filters the water can have a small bypass which sends water through the collector prior to returning to the pool and heat will be collected whenever it is available. It only applies a limited time period in which defects due to manufacturing may be eligible for a claim. 58 x 1800mm Long Vacuum Tubes. Mounting gear with 37° Inclined stand for Flat Roof / Ground installation (May be mounted to a roof by use of additional parts or fixtures such as 2 x 4’s). Tube holders for connecting the bottom of the tubes to the bottom rack of the frame. Hex Bolts & Nuts / Hardware. Unpressurized Solar Water Pool Collector Specifications. Thickness of interior shell. 0.4mm (0.016). Outer shell material of manifold. Thickness of exterior shell. 1.8mm (0.07). Material of Windproof Seal. Duda Solar Collector Specifications. 31.50 Liters (8.3 Gallons). Duda Solar Collector Parameters. 0.0025 Mpa (4 psi). Black Powder Coated or Argentine. Duda Solar Vacuum Tube Parameters. Solar Vacuum Glass Tube Material. High Boron Silicon 3.3 Glass. Coating of Absorber Glass Tube. Three Target Cu/SS-ALN(H)/SS-ALN(L)/ALN. All glass double tube co-axial structure. Sediment Method, 3 target magnetron sputtering plating. As=0.930.96 (AM1.5). 3.3 x 10. Absorber Area per Tube. 0.040.06(80°C ± 5°C). =0.040.06 (80°C±5°C) (176°F±9°F). Up to f25mm (f1). Average Heat Loss Coefficient. Duda Solar 30 Tube Pool Heater Calculations. Gallons of water heated by 1°F per day. The above heat calculation table is based on a latitude of 34.7° (Alabama), collector facing South at 37°, Average low ambient temperature of 65°F and average high of 95°F during the month of July. Anderson and Associates offer a good pool heat loss and gain calculator which may give a rough idea on how much heating could be needed for a pool during different months of the year. To use our collectors on their calculator, enter an area of 49 ft. Per collector used and efficiency of 60% (0.60). Alternatively, you can use their calculator to figure out “electric heating” costs to find out how many kw-hr/month you need. Simply enter into the form that you have electric heating. This will represent how many kw-hr you need per month to heat the pool. Using the heating chart above, you can figure out how many 30 tube solar collectors you need to do this. If our insolation is an average of 7 kw-hr/day, that means we need 806 kw-hr/7 = 3.86 (round up to 4) x 30 tube collectors to heat the pool to 80°F each day in the month of June. It should be noted that in order to keep a pool very warm during the colder months, it will take a significant amount of heating due to the mass amounts of heat loss. It is best to see solar pool heating as a supplemental means of heating a pool rather than an “all heat source” for a pool. Anderson & Associates calculator can be used to figure out the cost to heat a pool for certain months or year round using conventional means and then pool heaters can be used to remove some of those costs. Many people will find pool heaters to give tremendous amounts in savings (payback in 1-3 years of use) but may be turned off by the amount of solar energy needed to heat a pool entirely by solar in a cold month like January. The item “Vacuum Tube Solar Pool Water Heater with Stand” is in sale since Monday, July 1, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “dudadiesel” and is located in Decatur, AL. This item can be shipped to United States.

  • Brand: Duda Solar
  • MPN: DS-SC58P-30T
Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L


Pool & Spa Heat Exchanger 55kBtu Stainless Steel 316L Same Side 1″ and 3/4″ FPT. Our innovative spiral twisted corrugated tube design is engineered to maximize solar or boiler energy, increasing the overall thermal efficiency of the system. We offer these pool heat exchangers with capacities ranging from 55kBtu to 6000kBtu, made from either Stainless Steel 316L or Titanium, and with either opposite- or same-side ports. This listing is for the Stainless Steel 316L version. The Titanium version is highly recommended for salt water systems, as it is the only model that can withstand that kind of water. This swimming pool heat exchanger works with pools of up to 3,960 US gallons with 55kBtu/hr at 140F temperature difference between inlet water and heated water. Applications of Pool & Spa Heat Exchanger. Residential and Industrial Applications. Forced Air Heating Systems. Solar Hot Water Heating. FAQ and Support: Tips for operation: For start-up, open the valves gradually to increase flow and pressure in the unit. Then let cold water into the system, followed by hot water. Be sure to check the connections for leaks. When you’re done using the heat exchanger, stop the hot water supply first and then the cold water supply. We have worked with heating systems for over 10 years and are happy to help you with any questions or concerns that you may have. We are also closed for major holidays. If this is an issue for you, please let us know immediately so we can waive the requirement. The item “Swimming Pool Heat Exchanger Pool, Solar, Wood Boiler, Shell and Tube, SS316L” is in sale since Friday, March 8, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “alfaheatingsupply” and is located in Lancaster, Pennsylvania. This item can be shipped to United States, Canada.

  • Material: Stainless Steel 316L
  • Power Source: Gas / Wood / Solar / Heat Pump / Electricity
  • MPN: Does Not Apply
  • Brand: AB
210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


210,000 BTU Stainless Steel Tube and Shell. GPM Boiler Side 9.13. GPM Pool Side 63.94. Boiler Ports 11/2 NPT. Pool Ports – 1 1/2 NPT. Port to Port – 13 1/4. Number of Tubes – 30. PSI Drop Cold 1.06. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 18,060 gallons. These heat exchangers are constructed with a stainless steel 316L shell and stainless steel 316L corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 1 1/2″ – (to/from Pool) 1 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Stainless Steel Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Stainless Steel Pool and Spa Heat Exchangers are not suited for saline or salt water environments. For those applications please use one of our Titanium units. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate; 2. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers. Hydrochloric Acid up to 0.1% concentration. Solutions the contain MCI. Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation). Any fluid that will deposit alkaline residue or phosphorous. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “210,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807256638
Raypak 006733F Tube Bundle 265/266A/267A/R265A/R265B


Raypak 006733F Tube Bundle 265/266A/267A/R265A/R265B. This Is The Tube Bundle Used In The Raypak 265B Heater. This Is The Asme Approved Version Used With Cast Iron Headers. The Copper Tubing Used In The Asme Version Is Thicker Than The Standard Version. Each Tube Bundle Is Inspected By The Asme And Includes A Certificate. Of Compliance With Asme Specifications Signed By The Inspector. Arrival time will depend on your location. If you have any questions, feel free to ask. Thank you for visiting! Weight:36SCID:181071Dimension:19.000×9.000X22.000. The item “Raypak 006733F Tube Bundle 265/266A/267A/R265A/R265B” is in sale since Friday, February 15, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “gregory.281″ and is located in Bloomfield, Connecticut. This item can be shipped worldwide.

  • Brand: Raypak
  • MPN: 006733F
360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os


360,000 BTU Stainless Steel Tube and Shell. GPM Boiler Side 12.63. GPM Pool Side 94.70. Boiler Ports 11/2 NPT. Pool Ports – 2 NPT. Port to Port – 27 13/16. Number of Tubes 36. PSI Drop Cold 2.40. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 30,960 gallons. These heat exchangers are constructed with a stainless steel 316L shell and stainless steel 316L corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 1 1/2″ – (to/from Pool) 2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Stainless Steel Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Stainless Steel Pool and Spa Heat Exchangers are not suited for saline or salt water environments. For those applications please use one of our Titanium units. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers. Hydrochloric Acid up to 0.1% concentration. Solutions the contain MCI. Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation). Any fluid that will deposit alkaline residue or phosphorous. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “360,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas os” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807256706
Raypak 010060F Tube Bundle 266 267 Polymer Kit


Raypak 010060F Tube Bundle 266 267 Polymer Kit. Arrival time will depend on your location. If you have any questions, feel free to ask. Thank you for visiting! The item “Raypak 010060F Tube Bundle 266 267 Polymer Kit” is in sale since Wednesday, February 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “gregory.281″ and is located in Saginaw, Michigan. This item can be shipped worldwide.

  • Brand: Raypak
  • MPN: 010060F
85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss


85,000 BTU Stainless Steel Tube and Shell. GPM Boiler Side 8.27. GPM Pool Side 56.22. Boiler Ports 3/4 NPT. Pool Ports 1 NPT. Port to Port – 13 5/8. Number of Tubes – 19. PSI Drop Hot 1.02. PSI Drop Cold 1.28. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 7,310 gallons. These heat exchangers are constructed with a stainless steel 316L shell and stainless steel 316L corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 3/4″ – (to/from Pool) 1″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Stainless Steel Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Stainless Steel Pool and Spa Heat Exchangers are not suited for saline or salt water environments. For those applications please use one of our Titanium units. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Nominal values are based on 60°C temperature between incoming heating and heated water. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers. Hydrochloric Acid up to 0.1% concentration. Solutions the contain MCI. Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation). Any fluid that will deposit alkaline residue or phosphorous. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. The item “85,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807256836
Raypak 010059F Tube Bundle, Copper, R206A, R207A


Raypak 010059F Tube Bundle, Copper, R206A, R207A. SKU: 010059F Condition: New. See Owner’s Manual for details. Trusted by Pool and Spa Owners Since 2006. PoolSupplyWorld has been serving customers as a pool and spa resource since 2006. We believe that prompt, courteous communication is one of our best qualities, and we’re always looking for new ways to make shopping with us an easier, more convenient experience. Customer Service – You can reach us in one of three ways. Send us a message. We have relationships with the most popular manufacturers in the industry. We carry over 50,000 products. More than a Pool Store! We want to help you. We value building long term relationships. We want you to count on us. We accept verified U. Boxes or APO/FPO addresses. The item “Raypak 010059F Tube Bundle, Copper, R206A, R207A” is in sale since Tuesday, October 2, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “poolsupplyworld” and is located in Dallas, Texas. This item can be shipped to United States.

  • UPC: 0840891019527
  • Product Type: Pool Part
  • Manufacturer: Raypak
  • MPN: 010059F
  • Brand: Raypak