1000s of Everyday Products. Vehicle Parts & Accessories. Sign up to receive special insider notifications of our latest deals, promotions, and new listings! FAFCO Connected Tube (CT) 4 x 10 Ft Highest Efficiency Solar Pool Heating Panel. Enjoy a longer swimming season by heating your pool sooner, maintaining a comfortable water temperature, and keeping the pool warmer longer. FAFCO Connected Tube (CT) solar panels are the best solution for heating your swimming pool. Make the most of your backyard by spending more time in your pool. FAFCO’s Connected Tube (CT) solar panels are 100% tested to ensure the highest quality. You can rest easy knowing that your pool will warm each season, heated by the best solar system available. The patented internal flow control technology balances the water flow to each panel in the system, maximizing performance and heat. Heating a pool with natural gas, propane, or electricity is very costly. Use the sun to generate free heat and keep your pool at the temperature you desire. Install with FAFCO’s genuine accessories for a simple and reliable system. FAFCO Connected Tube (CT) panels can be installed on the roof or on a tilted ground-mounted rack. For best performance, panels should face south with unobstructed sunlight. The system should operate between 10 a. Put the sun to work for you and enjoy free heat from your FAFCO Connected Tube (CT). Easily heat up your inground swimming pool with renewable energy. Every unit is inspected and tested and made from stabilized polyolefins for a long life. Works with most inground pools, pumps, and filters. FAFCO’s Connected Tube (CT) design efficiently aids the solar panel. DIY installation with high-grade components. Dimensions (L x W x H): 120 x 48 x 1 inches. Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! Sign Up for Our.
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 3.81cm/1.5in FPT. Side of Hot Water Pipe. 401919cm/15.757.487.48in. Hot Water Flow Rate. Gas / Wood / Solar / Heat Pump / Electricity.
Product description:? The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used for one side of the swimming pool water and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr. It gets hot immedi. Stainless Steel Heat Exchanger Swimming Pool Heating System 135 kBtu/hour. The Pool Heat Exchanger Is Made of 304 Stainless Steel That Has Good Rust and Salty Water Resistance, so It Is More Durable and Has a Long Service Life. The Pool Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Incoming Water and the Hot Water, Delivering 135 Kbtu of Heat in One Hour, so It Is of High Efficiency. The Pool Heat Exchanger Uses an Innovative Spiral-wound Design to Ensure a Constant Temperature. It Is Very Suitable for Pools, Spas, Hot Tubs, Solar Energy, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. The Pool Heat Exchanger Is Made of 304 Stainless Steel That Has Good Rust and Salty Water Resistance, so It Is More Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Pool Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Incoming Water and the Hot Water, Delivers 135 Kbtu of Heat in One Hour, so It Is of High Efficiency. It Transfers Heat Indirectly Between Any Hot Water Circuit, Steam Circuit, and Any Pool or Spa Facility. With an Output of 135 Kbtu per Hour, This Pool Heat Exchanger Ensures the Pool Gets Hot Quickly Without Waiting, Saving Your Time and Energy. This Heat Exchanger Is a Non-storage Type, Where the Hot and Cold Fluids Have Separate Channels and Do Not Mix with Each Other. This Design Ensures That the Water Source Is Clean and Free of Contamination. Because of Its Smooth Surface and Few Crevices, It Can Be Easily Cleaned with a Damp Cloth Without Much Effort and Time. We Will Reply and Solve the Problem for You As Soon As Possible. The Spiral Wound Design of the Pool Heat Exchanger Effectively Ensures the Constant Temperature When Working. The Pool Heat Exchanger Is Made of 304 Food-grade Stainless Steel That Is Healthy to Use. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/Min. Cold Water Flow: 200 L/Min. Side of Hot Water Pipe: 2.54cm/1in Fpt. Same Side Port: 3.81cm/1.5in Fpt. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. 1 Stainless Steel Heat Exchanger. 1 1/2″ Fpt Is Used for One Side of the Pool Water and 1″ Fpt Is Used for Hot Water. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 3.2 square feet. 40 x 19 x 19cm.
Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger Description: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. What’s Included: 1 Stainless Steel Heat Exchanger 2 Fixed Brackets Features&Highlights: High Durability: The pool heat exch. Stainless Steel Water Heating System Tube Heater Exchanger Swimming Pool Equip. Swimming Pool Equip Stainless Steel Water Heating System Tube Heater Exchanger. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc.
Product description:? The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used for one side of the swimming pool water and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr. It gets hot immedi.
Description The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Key Features Great Durability Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc.
Description The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. Key Features Great Durability Ensuring Constant Temperature: The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Fast Heating Wide Application: It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc.
