Product description:? The swimming pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used for one side of the swimming pool water and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, and can provide a fresh pond at a rate of 135 kBtu/hr. It gets hot immedi. Stainless Steel Heat Exchanger Swimming Pool Heating System 135 kBtu/hour. The Pool Heat Exchanger Is Made of 304 Stainless Steel That Has Good Rust and Salty Water Resistance, so It Is More Durable and Has a Long Service Life. The Pool Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Incoming Water and the Hot Water, Delivering 135 Kbtu of Heat in One Hour, so It Is of High Efficiency. The Pool Heat Exchanger Uses an Innovative Spiral-wound Design to Ensure a Constant Temperature. It Is Very Suitable for Pools, Spas, Hot Tubs, Solar Energy, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. The Pool Heat Exchanger Is Made of 304 Stainless Steel That Has Good Rust and Salty Water Resistance, so It Is More Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Pool Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Incoming Water and the Hot Water, Delivers 135 Kbtu of Heat in One Hour, so It Is of High Efficiency. It Transfers Heat Indirectly Between Any Hot Water Circuit, Steam Circuit, and Any Pool or Spa Facility. With an Output of 135 Kbtu per Hour, This Pool Heat Exchanger Ensures the Pool Gets Hot Quickly Without Waiting, Saving Your Time and Energy. This Heat Exchanger Is a Non-storage Type, Where the Hot and Cold Fluids Have Separate Channels and Do Not Mix with Each Other. This Design Ensures That the Water Source Is Clean and Free of Contamination. Because of Its Smooth Surface and Few Crevices, It Can Be Easily Cleaned with a Damp Cloth Without Much Effort and Time. We Will Reply and Solve the Problem for You As Soon As Possible. The Spiral Wound Design of the Pool Heat Exchanger Effectively Ensures the Constant Temperature When Working. The Pool Heat Exchanger Is Made of 304 Food-grade Stainless Steel That Is Healthy to Use. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/Min. Cold Water Flow: 200 L/Min. Side of Hot Water Pipe: 2.54cm/1in Fpt. Same Side Port: 3.81cm/1.5in Fpt. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. 1 Stainless Steel Heat Exchanger. 1 1/2″ Fpt Is Used for One Side of the Pool Water and 1″ Fpt Is Used for Hot Water. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 3.2 square feet. 40 x 19 x 19cm.
