Pool Heaters
Just another WordPress weblog
1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. Side of hot water pipe: 1 FPT. Material: 304 stainless steel. Cold water flow: 250 L/min. Heat transfer area: 4.8 square feet.
1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. Side of hot water pipe: 1 FPT. Material: 304 stainless steel. Cold water flow: 250 L/min.
Pool/Spa Part – Hayward – Indoor Adapter Kit 250, 000 Btu – IDLIVT1250.
1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. Side of hot water pipe: 1 FPT. Material: 304 stainless steel. Cold water flow: 250 L/min. Heat transfer area: 4.8 square feet.
This gas valve is a direct factory replacement for both a Sta-Rite Max-E-Therm Heater and a Pentair Mastertemp Heater. It is factory sealed in its original packaging.
Product description:? The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. 2 inch FPT is used for swimming pool water, and 1 inch FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 400 kBtu/hr. It gets hot immediately without waiting.
Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on 5. Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off).