26-C3160-1S 6kW Low-Flow PDR Titanium Heater with Sensors for Hot Spring/Watkins. 6kW Low-Flow PDR Titanium Heater with Sensors. Replacement for Hot Spring/Watkins/Tiger River/Limelight Hot Tub Spa No-Fault. Replace Part# 26-C3160-1S, C3160-1S, 73790. Double-pass Barrel designed, features efficiently heating the water in two stages. PDR(power-down-reset) upgraded to auto reset, which means you don’t need to remove the equipment door to reset the heater, making it more convenient. Titanium heating elements used to extend the heater’s service life. Widely fit for most Tiger River Spas and Hot Springs systems from 1995 to current. Voltage: 120V or 240V. Required Flow Rate: 8 GPM. Come with Installation Manual for easy and quick installation, recommend installing by electrician or qualified pool/spa technician. Kindly please note this new heater’s cable color is not same with OEM. The color match from OEM to our Heater is: white refer to yellow which plug into H1 on circuit board, black refer to red which plug into H2 on circuit board, green refer to green which plug into Ground(GND) on circuit board. 1x Low-Flow Titanium Heater. 2x Sensors with new style 4-pin sensor plugs (2002+). 1x auto-reset high limit. 1x 18″ of 1″ O. 1x 12″ of 3/8″ O. 1x Barb Coupling 1/4″ x 1/4″. For Hot Spring/Watkins/Tiger River/Limelight Hot Tub Spa No-Fault. Hot Tubs, Above Ground Pools, In Ground Pools.
12000BTU/Hr Mini Swimming Pool Heater Built-in Circulating Water Pump Control System, 3KW Electric Pool Heater for Above Ground Pools, SPA Pools and Bathtubs, 240V 50-60Hz, Up to 2000 Gallons. New see pictures, contents verified and shown in photos.
What’s Included: 1 X Stainless Steel Heat Exchanger 2 X Fixed Bracket Weights&Dimensions Packing Size: 48.514cm/19.095.5inch Weight: 5.2kg Specifications : Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Same Side Port: 1 1/2″ Fpt. Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT Stainless Steel. Swimming Pool Heat Exchanger Tube Shell Heat Exchanger 1″+ 1 1/2″FPT 200KBTU. The Swimming Pool Heat Exchanger Is Made of Stainless Steel, so It Is Very Sturdy and Very Suitable for Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The heat exchanger is made of 304 stainless steel so that it is rustproof and saltwater resistant, which is durable and has a long service time. It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. Therefore, it is suitable for chlorine or saltwater pools and spas. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Packing Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. The Shell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water, and Can Provide a Fresh Pond of 200 Kbtu/Hr. The Heat Recovery Pool Heater Is Very Suitable for Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting, Etc. The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. Excellent Heat Conduction Design. The Salt Pond Heat Exchanger Adopts an Innovative In-line Design to Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Inside pipes burst due to freezing water in winter all parts available as of now except inside pipes.
What’s Included: 1 X Stainless Steel Heat Exchanger 2 X Fixed Bracket Weights&Dimensions Packing Size: 48.514cm/19.095.5inch Weight: 5.2kg Specifications : Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Same Side Port: 1 1/2″ Fpt. New Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT Stainless Steel. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Packing Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 11.5lbs(5.2kg). Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 4.8 square feet. 48.514cm/19.095.5inch.
Pool/Spa Part – Raypak – Valve, Gas Nat. Raypak Valve Gas Nat. Catalog Part Number: 6230-09. View more great items. The Polaris P825 Robotic Pool Cleaner (WR000044). Len Gordon Pressure Switch Universal 21 Amps 1/8in. NPT SPDT Stainless Base Bulk. In The Swim Deluxe Swimming Pool Maintenance Kit? Garden Hose Vacuum Head. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
PoolZone Resin Solar Cover Reel for In Ground Pools (552003CYCRSPZN). PLEASE TAKE A GOOD LOOK AT THE PHOTOS, TO MAKE SURE YOU ARE GETTING THE ITEM YOU NEED.
The Universal H-Series is an energy efficient, high performance, installation adaptable commitment to the pool service professional. Standard Cupro Nickel Heat Exchanger Excellent Salt Water and chemical Corrosion Resistance Exclusive’Totally Managed’ Cupro Nickel Heat Exchanger Water Flow Same Water Velocity Through All Tubes for Faster Heating Patented Header By-Pass Design Up to 18% Savings by Reducing Pump Run-Time 2inx 2 1/2in CPVC Union Plumbing Connections Common Union for Installation or Service, Adapts to Larger Plumbing Recommended for Greater Efficiencies Low NOx Emissions – Meets Clean Air Quality Standards Replacement parts are warrantied for 6 months (plastic parts that don’t require electricity) or 1 year (parts that require electricity and/or are made of metal). Universal H-Series Parts Diagrams Ctn. Weight 17.0 lbs.
What’s Included: 1 X Stainless Steel Heat Exchanger 2 X Fixed Bracket Weights&Dimensions Packing Size: 48.514cm/19.095.5inch Weight: 5.2kg Specifications : Material: 304 Stainless Steel Output: 200 Kbtu/Hour Heat Transfer Area: 4.8 Square Feet Hot Water Flow Rate: 30 L/Min Cold Water Flow: 250 L/Min Side of Hot Water Pipe: 1″ Fpt Same Side Port: 1 1/2″ Fpt. New Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT Stainless Steel. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Packing Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
