20000 BTU Swimming Pool Heat Pump for Above-Ground Pools 110V 5.6kW Pool Heater. ???? 20000 BTU Swimming Pool Heat Pump for In/Above-Ground Pools 110V 5.6kW Pool Heater?????? Swimming Pool Heat Pump: This electric pool heater is suitable for small above-ground pools up to 6600 gallons and in-ground pools up to 4,226 gallons. (Please read item description for more details as reference). It’s your perfect heat pump solution for above ground and inground swimming pools with 1-1/2inch water hose connection. ? Efficiency and Easy to Installation: Allowing fast and easy hookup without professional installation. With innovative flat-tube titanium heat exchanger, the heat exchanging efficiency is 30% higher than spiral tubes. ? Unique Design: Efficient rotary compressor and low-noise fan guarantee extremely quiet operation. Galvanized steel body panels with cute and graceful design are impervious to rust and deterioration. The setting water temperature is available on digital LED display. ? Premium Security: Available with child lock. Advanced protection system with auto electrical-leakage and low-voltage switch, high and low-temperature, and compressor discharge over-high protection. ? Working Requirements: 110volts, 60 HZ for USA electricity. We will always here to help you. With DOEL 20000 BTU Swimming Pool Heat Pump, Your Swimming Season Will Last Even Longer! Heating & cooling with reverse circle defrost. Performance at Air 78.8°F, Water Heated to 78.8°F, Relative Humidity 80%. Heating Capacity:5.56 kW(19000 BTU). Power consumption:1.09 kW(3720 BTU). Performance at Air 59°F, Water Heated to 78.8°F, Relative Humidity 70%. Heating capacity:3.67 kW(12525 BTU). Power consumption:0.9 kW(3071 BTU). Rated Heating inpurt power: 1.12kw. Max Current: 13 A. Heating Performance: 20000 BTU. Advised Water Flow: 527gallon/h. Water Hose Connection: 1-1/2inch. Two pipe adapters will come with the heat pump, providing added convenience and flexibility during installation. You can easily connect your water pump and heat pump using a 50mm PVC pipe, ensuring a seamless and efficient water flow. Versatile and User-Friendly Smart Control Panel. Heater comes equipped with a multifunctional smart control panel that offers a range of convenient features. With just a few taps, you can effortlessly switch to different mode. The built-in timer allows you to schedule the unit to power on or off at specific times, Experience simplicity and ease of use with our intuitive control panel, making temperature management a breeze. Swimming heat pump utilizes R410A refrigerant, known for its exceptional heating efficiency and superior performance. Not only does it provide excellent heating capabilities, but it also minimises the impact on the ozone layer. Our heat pump features that works at a remarkably low noise level of 49 decibels. With its high efficiency cooling and whisper-quiet operation, our heat pump allows you to enjoy a peaceful and comfortable swimming experience. Efficient and Low Noise Rotary Compressor. Durable and Anticorrosive Titanium Heat Exchanger. This product is warehoused in TX, USA. But you can apply to cancel the order and place a new one at your new address. The package must be in its original packaging and include all of the original accessories or items that came with it when returning an item. The item and package should be in original and perfect condition. Don’t forget that good communication can solve all problems. Any questions, please feel free to send message to us first. Please remember we are always here to serve you and ensure you a happy shopping experience. Welcome to our store. Our company is specialized in Home & Pet Supplies. It is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place orders. (GMT+8) of Monday to Friday. If you have any questions, please message us and give us a chance to assist you.
Product description:? The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. 2 inch FPT is used for swimming pool water, and 1 inch FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 400 kBtu/hr. It gets hot immediately without waiting. Tube and Shell Heat Exchanger 400kBtu 304 Stainless Steel for Spa Heat Recovery+. 304 Stainless Steel Tube and Shell Heat Exchanger 400kBtu for Spa Heat Recovery. The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Output: 400 kBtu / hr. Heat transfer area: 11.8 square feet. Hot water flow rate: 50 L/min. Cold water flow: 360 L/min. Side of hot water pipe: 1 FPT. Port on the same side: 2 inch FPT. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Easy installation, Convenient Use, Easy Operation. Transportation does not include. As the description shows. 400 kBtu / hr. 11.8 square feet. Hot water flow rate. Side of hot water pipe. Port on the same side.
Tube and Shell Heat Exchanger 400kBtu 304 Stainless Steel for Spa Heat Recovery. 304 Stainless Steel Tube and Shell Heat Exchanger 400kBtu for Spa Heat Recovery. The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. 2 inch FPT is used for swimming pool water, and 1 inch FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 400 kBtu/hr. It gets hot immediately without waiting. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Output: 400 kBtu / hr. Heat transfer area: 11.8 square feet. Hot water flow rate: 50 L/min. Cold water flow: 360 L/min. Side of hot water pipe: 1 FPT. Port on the same side: 2 inch FPT. 1 x stainless steel heat exchanger. 2 x fixed bracket. Transportation does not include. As the description shows. 400 kBtu / hr. 11.8 square feet. Hot water flow rate. Side of hot water pipe. Port on the same side.
Product description:? The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. 2 inch FPT is used for swimming pool water, and 1 inch FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 400 kBtu/hr. It gets hot immediately without waiting. Tube and Shell Heat Exchanger 400kBtu 304 Stainless Steel for Spa Heat Recovery. 304 Stainless Steel Tube and Shell Heat Exchanger 400kBtu for Spa Heat Recovery. The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Output: 400 kBtu / hr. Heat transfer area: 11.8 square feet. Hot water flow rate: 50 L/min. Cold water flow: 360 L/min. Side of hot water pipe: 1 FPT. Port on the same side: 2 inch FPT. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday.
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Pool Heat Exchanger Tube Shell Swimming Pool Heat Exchanger 1 ” +1 1/2″FPT kit. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Transportation does not include. Convenient Use, Easy Operation, Easy installation. Creative Design, Durable Material, Beautiful Appearance. 3.81cm/1.5in FPT. Side of Hot Water Pipe. 401919cm/15.757.487.48in. Hot Water Flow Rate. Gas / Wood / Solar / Heat Pump / Electricity.
Product description:? The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. 2 inch FPT is used for swimming pool water, and 1 inch FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 400 kBtu/hr. It gets hot immediately without waiting. Tube + Shell Heat Exchanger 400kBtu 304 Stainless Steel for Spa Heat Recovery US. 304 Stainless Steel Tube and Shell Heat Exchanger 400kBtu for Spa Heat Recovery. The pool heat exchanger is made of high-grade anti-corrosion stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt pools and spas. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Output: 400 kBtu / hr. Heat transfer area: 11.8 square feet. Hot water flow rate: 50 L/min. Cold water flow: 360 L/min. Side of hot water pipe: 1 FPT. Port on the same side: 2 inch FPT. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Made of high quality material. As the description shows. 400 kBtu / hr. 11.8 square feet. Hot water flow rate. Side of hot water pipe. Port on the same side.
This Rome heat pump is all in working order and has been fully tested and runs great. This unit has a digital screen read out with just three buttons, making it very simple and easy to use. This heater can be ran off of a minimum circuit of 40 A, but 50 A is recommended. The unit is in great condition cosmetically for being an older used heat pump. The fan is very quiet and the compressor kicks on with no issues and it does not Overheat either. This is definitely a pretty solid little heater and is ready to be plumbed in and wired up. Please remember that this is a used heat pump and small parts do fail eventually. I have learned that the main part that fails on these heaters mostly is the pressure switch, which is the part that detects whether the unit has flow or not overall, it looks good and all of the coils around the outside are in near mint condition with no corroding or anything like that. Please review all of the pictures that I have posted for additional item details and condition. I will load up pictures of the wiring compartment as well. This heater will need to be picked up in Wimauma Florida. Thank you so much for looking.