Pentair Ultra Temp Heat/Cool Swimming Pool Heat Pump 125K BTU UltraTemp 460935


Pentair Ultra Temp Heat/Cool Swimming Pool Heat Pump 125K BTU UltraTemp – 460935. SKU: 460935 Condition: New. With today’s record energy costs, there’s never been a better time to invest in a heat pump. Compared to gas, oil or electric heaters, UltraTemp uses just a fraction of the energy to generate the same amount of heat. An Eco Select Brand Product: UltraTemp High Performance Heat Pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Pentair heat pumps have used the EPA-recognized, environmentally safe, non-ozone depleting R-410A refrigerant for nearly 10 years, earning UltraTemp the Eco Select Brand. Warning: Chemicals or materials known to the state of California to cause cancer, or birth defects or other reproductive harm may be present in this product. 100% titanium heat exchanger assures corrosion-free performance for extra long life and value. LCD control board displays an intuitive, menu-driven readout with easy to follow, full word messages – no more codes. AutoSet (time clock over-ride) feature monitors water temperature and turns the water circulation pump on and off as needed to maintain desired pool temperatures. Automatic defrost feature senses refrigerant temperature and prevents UltraTemp from freezing, allowing the heat pump to operate at even lower temperatures. Compatible with all automated control packages. Long-life corrosion resistant plastic composite cabinet stands up to severe climates and pool chemicals. Emerson Copeland Scroll Compressor. ETL listed for safe operation. Thermostatic Expansion Valve (TXV) controls refrigerant flow for optimum efficiency and BTU output over a wider operating range. Highest efficiency available, meets or exceeds existing codes and standards. BTU and efficiency performance independently certified by the Air-Conditioning, Heating and Refrigeration Institute, AHRI. See Owner’s Manual for details. Trusted by Pool and Spa Owners Since 2006. PoolSupplyWorld has been serving customers as a pool and spa resource since 2006. We believe that prompt, courteous communication is one of our best qualities, and we’re always looking for new ways to make shopping with us an easier, more convenient experience. Customer Service – You can reach us in one of three ways. Send us a message. We have relationships with the most popular manufacturers in the industry. We carry over 50,000 products. More than a Pool Store! We want to help you. We value building long term relationships. We want you to count on us. We accept verified U. Boxes or APO/FPO addresses. The item “Pentair Ultra Temp Heat/Cool Swimming Pool Heat Pump 125K BTU UltraTemp 460935″ is in sale since Wednesday, February 6, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “poolsupplyworld” and is located in Dallas, Texas. This item can be shipped to United States.

  • UPC: 788379789350
  • Compressor Type: Scroll
  • Controls: Digital
  • Heat Output: 120
  • Product Type: Pool Heat Pump
  • Heat Exchanger: Titanium
  • Voltage: 230V
  • C.O.P.: 5.4
  • Color: Almond
  • Heat/Cool: Heat/Cool
  • Pool Type: Spa/Hot Tub
  • Manufacturer: Pentair
  • Phase Type: Single Phase
  • Energy Efficient: Yes
  • Installation Type: Residential
  • MPN: 460935
  • Brand: Pentair
Raypak 006733F Tube Bundle 265/266A/267A/R265A/R265B


Raypak 006733F Tube Bundle 265/266A/267A/R265A/R265B. This Is The Tube Bundle Used In The Raypak 265B Heater. This Is The Asme Approved Version Used With Cast Iron Headers. The Copper Tubing Used In The Asme Version Is Thicker Than The Standard Version. Each Tube Bundle Is Inspected By The Asme And Includes A Certificate. Of Compliance With Asme Specifications Signed By The Inspector. Arrival time will depend on your location. If you have any questions, feel free to ask. Thank you for visiting! Weight:36SCID:181071Dimension:19.000×9.000X22.000. The item “Raypak 006733F Tube Bundle 265/266A/267A/R265A/R265B” is in sale since Friday, February 15, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “gregory.281″ and is located in Bloomfield, Connecticut. This item can be shipped worldwide.

  • Brand: Raypak
  • MPN: 006733F
3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Sign up to Newsletters. 220V 3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat. Thermostat is designed specifically for the needs of the Jacuzzi, the thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the thermostat automatically heating insulation, the bath water temperature maintained at 30-40 adjustable, it can give your massage bathtub to create a comfortable environment. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40°C. The operation of the thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. The 220V/3KW thermostat is designed to efficiently maintain the water temperature of a standard bathtub at the preset level of 40 (104). However, if starting with cold water, the thermostat will increase the temperature at a rate of 6 to 8 (11 to 14) per hour, depending on the initial water temperature, the room temperature, and the size of the bathtub. Once turned ON the thermostat stays ON until the temperature reaches the preset temperature, and then it will turn OFF automatically. It will stay OFF until the temperature drops a few degrees below the preset value, then it will turn back ON. The thermostat continues this ON/OFF cycle for as long as the pump is ON. The indicating lamp is located marks HEATER place. High Temperature Protection/Reset Button. In addition to the regulating thermostat, the thermostat is equipped with a manual reset High Temperature Protection to protect the user against the hazards of high temperatures. In the event of water or the thermostat enclosure reaching temperatures of higher than 49(120) because of blockage or other reasons, the High Temperature Protection will trip(interrupt power) immediately. In order to reset, let the water cool down to approximately 38 (100), then simply push the Reset Button on the top panel. The thermostat should resume operation in the normal manner. The thermostat is equipped with a pressure-sensing switch that protects the thermostat against the hazard of running the system without water. If the water level is low at the beginning or drops low during the operation water pressure is lower than 20KPa (about 2000mmHO2) the pressure sensing switch will interrupt power. Heater can only come ON when the water is at the appropriate level (water pressure is above 20KPa) and the water pump is running. Under no circumstances should any of the outlet (side) ports be closed. Water must flow through both ports when the thermostat is on. At the same time, inlet of heater must be installed perfectly matching to the outlet of water pump to give maximum water flow. Try to ensure that a minimum length of piping is maintained between the thermostat and any opening to the tub. Take off the joint on the outlet/inlet of the thermostat. Glue one side of the joint to the pipe tightly first, then hand tighten the other side to the outlet/inlet of the thermostat. After the installation of the water pump, heater and fitting system, a complete draining must take place, no water is allowed. When using electrical products basic precautions should always be followed, including the following. All electrical connections must be performed by a qualified electrician in compliance with all applicable national and local codes. Danger risk of electric shock connect only to a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI). To prevent the risk of electrocution, check heater for proper ground connection. The thermostat must be properly grounded with a conductor equal to or greater than the power supply conductors. Before making any electrical connection or during installation and service make certain that the electrical power is turned off at the source or circuit breaker and take measures that it CANNOT accidentally be turned on again. Provides the suitable power line according to the thermostat. Connect the provided 220V, 3 wires with grounding branch circuit to a suitable junction box near the thermostat. The power supply should be 220V/50Hz. The blue wire should be connected to L terminal, orange wire should be connected to N terminal and the yellow and green wire should be connected to the ground terminal. Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installe. The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology. When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance (chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. The product is small, easy to install in the bathtub at the bottom of the circulating massage pipe. Pipe Dimeter: 1/2.54cm. Size: 340 122 125mm/13.44.85inch. Net Weight: 2kg/4.4lbs. Phase Parameters: Single Phase. Suitable For: Swimming Pool Equipment. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Westminster Hwy, Richmond, BC, Canada. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat” is in sale since Wednesday, February 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “hotitemsale” and is located in Richmond. This item can be shipped worldwide.

  • Brand: VEVOR
  • MPN: FGFDG00701521164683
  • Model: B-M3-50MM
  • Material: Metal
  • Voltage: 220-240V/50-60Hz
  • Power: 3KW
  • Current: 14A
  • Wire: 3*4 Square millimeter
  • Pipe Dimeter: 2.54cm/1inch
  • Size: 340 * 122 * 125mm/13.4*4.8*5inch
  • Net Weight: 2kg/4.4lbs
  • Phase Parameters: Single Phase
  • Suitable For: Swimming Pool Equipment
  • Interface size: 50mm/1.97inch
Raypak PR266AEN 266K BTU Electonic Natural Gas Swimming Pool Heater


Raypak PR266AEN 266K BTU Electonic Natural Gas Swimming Pool Heater. The item “Raypak PR266AEN 266K BTU Electonic Natural Gas Swimming Pool Heater” is in sale since Monday, August 5, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “tibo_us2014″ and is located in Burbank, California. This item can’t be shipped, the buyer must pick up the item.

  • Model: P-R266A-EN-C
  • Material: Copper
  • Power Source: Natural Gas
  • MPN: PR266AEN

Pentair MasterTemp 200K BTU Propane LP Electronic Low NOx Pool Heater 460731


Pentair MasterTemp 200K BTU Propane LP Electronic Low NOx Pool Heater 460731. The Pentair MasterTempT 200K BTU propane pool heater offers all the efficiency, reliability and performance youd expect from one of the most popular pool heaters on the market. Certified for low emissions, the Pentair out-performs industry exhaust standards, and its hot surface ignition system means this pool heater will light even in the windiest conditions. A rotating digital display place the digital, push-button controls where they are easily accessible no matter how the pool heater is oriented or positioned. Controls rotate to 3 positions so there’s no need to reverse the header, simplifying installation. Quick-change orifice allows easy conversion of gas sources. Compact design (21 L x 21W x 28 H) is easy to retrofit, no matter what the space challenges. Eco-friendly MasterTemp is certified for low NOx emission and outperforms industry standards. Rotating digital display allows for easy viewing. Exterior shell is made of a tough, durable composite that wont rust or fade from the weather. Built-in carrying handles for easy transport. Top-mounted, large format digital display for easy viewing. Customers who have shopped with us before can tell you. Specialty Pool Products. Offers the finest, most innovative and most effective items for your pool, spa, backyard and home. We only sell products that meet our strict standards for quality, function and value. And there is more… Specialty Pool Products also promises you. We are unable to make changes or cancellations to orders after they are placed. Oversized deliveries are curbside only with FREE Lift Gate Service. If the combined weight of your order is 500 lbs. At SPP, your satisfaction is always our primary concern. We hold ourselves to the highest standards and value the trust you place in us. We pledge not to share this information with other organizations for commercial purposes. Specialty Pool Products does not rent or sell its customer list. The item “Pentair MasterTemp 200K BTU Propane LP Electronic Low NOx Pool Heater 460731″ is in sale since Friday, January 19, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “specialtypoolproducts” and is located in United States. This item can be shipped to United States.

  • UPC: 788379724061
  • Fuel Type: Propane Gas
  • Eco-Friendly: Yes
  • Product Type: Pool Heater
  • Warranty: 2-Year
  • Pool Type: Spa/Hot Tub
  • Heat Exchanger: Copper
  • Manufacturer: Pentair
  • Controls: Digital
  • Elevation: 0 – 2
  • Installation Type: Residential
  • Emission: Low NOx
  • Energy Efficient: Yes
  • Heat Output: 200
  • Ignition: Electronic
  • MPN: 460731
  • Brand: Pentair

Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower, Preowned


Jandy Laars LX or LT Heater Combustion Blower. In very good to good used condition. Tested before removal, all were from leaking. Heaters, which were replaced with new ones. Some have corrosion, which is normal for pool equipment. The mounting brackets may vary. Either is the same dimensions. Please verify your heater combustion blower is. The item “Jandy Laars LX or LT Heater Combustion Blower, Preowned” is in sale since Friday, June 14, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “moodeeone” and is located in Yorba Linda, California. This item can be shipped to United States.

  • Brand: Jandy
3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


Sign up to Newsletters. 220V 3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat. Thermostat is designed specifically for the needs of the Jacuzzi, the thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the thermostat automatically heating insulation, the bath water temperature maintained at 30-40 adjustable, it can give your massage bathtub to create a comfortable environment. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40°C. The operation of the thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. The 220V/3KW thermostat is designed to efficiently maintain the water temperature of a standard bathtub at the preset level of 40 (104). However, if starting with cold water, the thermostat will increase the temperature at a rate of 6 to 8 (11 to 14) per hour, depending on the initial water temperature, the room temperature, and the size of the bathtub. Once turned ON the thermostat stays ON until the temperature reaches the preset temperature, and then it will turn OFF automatically. It will stay OFF until the temperature drops a few degrees below the preset value, then it will turn back ON. The thermostat continues this ON/OFF cycle for as long as the pump is ON. The indicating lamp is located marks HEATER place. High Temperature Protection/Reset Button. In addition to the regulating thermostat, the thermostat is equipped with a manual reset High Temperature Protection to protect the user against the hazards of high temperatures. In the event of water or the thermostat enclosure reaching temperatures of higher than 49(120) because of blockage or other reasons, the High Temperature Protection will trip(interrupt power) immediately. In order to reset, let the water cool down to approximately 38 (100), then simply push the Reset Button on the top panel. The thermostat should resume operation in the normal manner. The thermostat is equipped with a pressure-sensing switch that protects the thermostat against the hazard of running the system without water. If the water level is low at the beginning or drops low during the operation water pressure is lower than 20KPa (about 2000mmHO2) the pressure sensing switch will interrupt power. Heater can only come ON when the water is at the appropriate level (water pressure is above 20KPa) and the water pump is running. Under no circumstances should any of the outlet (side) ports be closed. Water must flow through both ports when the thermostat is on. At the same time, inlet of heater must be installed perfectly matching to the outlet of water pump to give maximum water flow. Try to ensure that a minimum length of piping is maintained between the thermostat and any opening to the tub. Take off the joint on the outlet/inlet of the thermostat. Glue one side of the joint to the pipe tightly first, then hand tighten the other side to the outlet/inlet of the thermostat. After the installation of the water pump, heater and fitting system, a complete draining must take place, no water is allowed. When using electrical products basic precautions should always be followed, including the following. All electrical connections must be performed by a qualified electrician in compliance with all applicable national and local codes. Danger risk of electric shock connect only to a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI). To prevent the risk of electrocution, check heater for proper ground connection. The thermostat must be properly grounded with a conductor equal to or greater than the power supply conductors. Before making any electrical connection or during installation and service make certain that the electrical power is turned off at the source or circuit breaker and take measures that it CANNOT accidentally be turned on again. Provides the suitable power line according to the thermostat. Connect the provided 220V, 3 wires with grounding branch circuit to a suitable junction box near the thermostat. The power supply should be 220V/50Hz. The blue wire should be connected to L terminal, orange wire should be connected to N terminal and the yellow and green wire should be connected to the ground terminal. Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installe. The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology. When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance (chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. The product is small, easy to install in the bathtub at the bottom of the circulating massage pipe. Pipe Dimeter: 1/2.54cm. Size: 340 122 125mm/13.44.85inch. Net Weight: 2kg/4.4lbs. Phase Parameters: Single Phase. Suitable For: Swimming Pool Equipment. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Westminster Hwy, Richmond, BC, Canada. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath” is in sale since Friday, November 23, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “businesspleasant” and is located in Richmond. This item can be shipped worldwide.

  • Brand: VEVOR
  • MPN: CXZGC004101521164683
  • Model: B-M3-50MM
  • Material: Metal
  • Voltage: 220-240V/50-60Hz
  • Power: 3KW
  • Current: 14A
  • Wire: 3*4 Square millimeter
  • Pipe Dimeter: 2.54cm/1inch
  • Size: 340 * 122 * 125mm/13.4*4.8*5inch
  • Net Weight: 2kg/4.4lbs
  • Phase Parameters: Single Phase
  • Suitable For: Swimming Pool Equipment
  • Interface size: 50mm/1.97inch
80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping


80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping



Tempered Glass Solar Panel. Flexible Foldable Solar Panel. World-class quality START WITH DOKIO. Use it for your RV when camping, or during beach trips with the family, either way. It’s renewable energy that’s completely portable and so easy to use. DOKIO products are made by A grade raw materials, and all model have pass through TUV CE ISO Certification! 25-year Linear Performance Guarantee. DOKIO guarantees, over 25 years, that the modules performance. Will not decrease by more than 0.7% per year a distinct added value. Compared to the two-tiered guarantees usual in the industry. For more product introduction, syestem set up method and troubleshooting information, please check our Video Tips page. We offer complete residential and commercial solar kits for both on-grid and off-grid applications, including inverters, railing, and other system components. If you’re looking for a convenient and portable power solution, the. DOKIO 80W Solar Suitcase. Is a perfect choice! More power with the same portability! The DOKIO 80W uses our premium Eclipse panels to give you the most efficiency when charging your portable appliances. Featuring the same cells as our very popular 100W Solar Panel, you will have the highest efficiency DOKIO has to offer! This solar panel maximum packs 80W of power under ideal laboratory condition which is only 0.2 inch thick and weighs only 2.4 KG. Making it easier to transport, hang, and remove. E panel is well protected in a thick fabric pocket sewn. A practical carrying handle is available easy to carry and use and with, Ideal to use for ca. Hiking, picnic, charging your car battery, or in emergencies. With high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is s. Maller than a traditio. Aximizes system output by reducing mis. Match loss; 100% EL testing on all DOKIO solar modules, guaranteed no hot spots. FREE INVERTER SOLAR CONTROLLER for you (save 40 dollars). Just throw away your heavy battery, this controller can use without battery, one Dokio solar panel and. One Dokio new inverter controller meet everything. All items that have been re. Turned by a customer. There may be scratches on the surface as well as rust, bent corners, or other cosmetic damage to the frames, but this will not affect the performance of the products. All products listed have been thoroughly tested before being repackaged. Pictures may vary from the actual products received. Open box items might not come with the original packaging. DOKIO 80W Foldable Solar Suitcase. Maximum Power(Pmax): 80W. Short-Circuit Current (Isc):4.6A. Maximum Power Voltage(Vmp):18.00V. Maximum System Voltage: DC1000V. Maximum Power Current (Imp):4.44A. Nominal Operating Cell Temp. (NOCT):-45 to 80. Open-Circuit Voltage (Voc): 21.6V. Weight: 2.4 kg. Dimensions: 550 x5302 x 5mm. Accessories: Cable, Solar Panel, Controller. Minor reduction in efficiency under partial load conditions at 25°C: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved. If you there is any problem please send us a message and our Customer Service team will be happy to assist you. Please note that we won’t b. E able to process any order. With PO Box address for any size of solar panel. If your order arrives with app. If you later discover. Anything outside of this policy requires special authorization. High Performance & Versatile Application Anywhere. It can be curved to a maximum 30 degree arc, which makes it ideal for storage in tight spaces or crowded areas. This solar panel packs 100W of power. But it only weighs a mere 4.7lbs, making it easier to transport, hang and install. Short circuit and surge protection technology keep. You and your devices safe. It is not recommended to connect the solar panels in parallel, because it will cause over-current which may damage the product and the battery. It is not recomm. Ended to use more than 8 solar panels in series connection. Once the voltage exceeds 40V, an extra controller will be needed to protect the device being charged. Please handle the solar panel with care and avoid over-bending or bump, otherwise this may result in damage to the product. The plastic film is used to protect the panel, it may fall off during use, but it will not affect the solar panel. After long strong sunlight , leave the panel away from flammable materials, such as paper, fallen leaves and so on. 4 Holes on pa. Rilled for fast mounting and securing, perfect for non-permanent installations. The junction box on the panel is sealed and waterproof. Applicable for RV, boat, cabin, tent, yachts, car, trucks, trailers, etc. Installation and operation of solar cell module. Install PV module according to the following conditions. Ambient Temperature: 20 to 40. Operating Temperature: 20 to 80. Borne Snow Pressure: less than 2000Pa. Borne Wind Pressure: less than 3000Pa. Water proof: dont soak the PV module in water or continuously expose it to the sprinkling device or under fountains. Corrosion resistance: except for corrosive salt area and sulfurous area. Module shall be installed facing south (northern hemisphere) or north (southern hemisphere). Facing east or west may send only a relatively small amount of electric energy, and incorrect installing orientation will cause a loss in energy output. Series-connected PV module shall be installed in the same direction and with the same angle, because different directions and angles may cause loss of energy due to the differences of solar radiation. Installation of module shall avoid under shadows. Even though the module decreases loss of energy through bypass diode, the shadow will cause loss in energy output. Under normal circumstances, the module generates more current and voltage in routines than in the standardized testing conditions, therefore, please operate the configuration by multiplying 1.25 times of the short-circuit current and open-circuit voltage during the installation and application. The module must be installed on the roof with fire proof function. Connector for installation and connection needs to obtain the approved certification of connector (VDE V 0126-3). Junction box with the type required by the installation and connection needs to obtain the approved certification of junction box (2 PFG1162). Cables with the type required by the installation and connection need to obtain the approved certification of cables (2 PFG1161). When installing modules in batches, the interval distance between modules shall be larger than 100mm. Firstly, place the solar cell module with certain angle (generally 30° or 45°in horizontal plane), and choose a direction that can let the sunlight directly radiate the solar cell module for more time to place the module. Module and bracket shall be fully contacted with the ground. When installing modules, keep away from ignition source or fuels. Installation structure and bracket must bear external pressures such as wind pressure and snow pressure. Installation structure shall be environment resistant and chosen appropriate materials and preservative treatment. Method for high altitude installation shall be appropriate. High falling may cause death, disability and damages. It is forbidden to disassemble, bend, toss the module, nor shock it by hard objects or walk on it. Wire Connection and Precautions. Open the junction box, connect the red wire to the positive pole (+) and the black wire to the negative pole (-) and insert the other end to the interface of the solar cell wire of the battery cabinet. Fasten the module on the bracket by fastening piece and module mounting hole, the hardness and intensity of the fastening piece and module bracket must achieve the standard and be in accordance with relevant requirements. Use the private joint provided by the company. Note: short-circuit for positive and negative poles are forbidden. The joint shall be tightened without any clearances; otherwise, the clearances may cause sparks. Check if the fastening part of the installation structure is loosen; otherwise, it must be tightened. Often clear the dust and dirt on the surface of the PV module with soft cloth to prevent the loss in energy output due to the block on the surface of the module. Check frequently if the surface of the module is blocked by objects. Replace modules with the same specifications and the same type products. Be careful not to contact the exposed part of the wire or joint, and if it is necessary, wear the insulator such as tools, gloves, etc. During the process of installation and maintenance, be sure to cover the surface of the module with cloth or other light proof materials, because the module will generate high voltage under solar radiation which would be dangerous. Through the highest standards of European testing. Our strength guarantees quality and quantity. The item “80W 12V Solar Panel Flexible Foldable USB Portable Kit Boats/Out-door Camping” is in sale since Monday, August 26, 2019. This item is in the category “Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits”. The seller is “dokio1985″ and is located in Edwardsville, Illinois. This item can be shipped to United States.

  • Maximum Power Voltage(Vmp):: 18.00V
  • Wire Length:: 3M
  • System Configuration: Off-Grid
  • Solar Technology: Monocrystalline
  • Maximum Power Current (Imp):: 4.44A
  • Wattage: 80
  • MPN: Does Not Apply
  • Voltage: 18 V
  • Style: Contemporary
  • Features: Corrosion Resistant
  • Materia: Monocrystalline Silicon
  • Protection Properties: Overcharge Protection
  • Pliability: Flexible
  • Open-Circuit Voltage (Voc):: 22.5V
  • Number of Panels: 2
  • Color: Red
  • Current Rating: 1
  • Dimensions: 550 x530*2 x 5mm
  • Weight:: 2.4 kg
  • Brand: DOKIO
  • Type: Solar Panel
  • Maximum Power(Pmax):: 80W
  • Panel Quantity: 1
  • Model: FFSP-80W
  • Recommended Environment: Indoor/Outdoor
  • Country/Region of Manufacture: China
  • Resistance Properties: Water Resistant
  • Application: Back-Up Power
  • Product Line: Sunny Boy