3 KW Water Heater for Swimming Pool & bath B


3 KW Water Heater for Swimming Pool & bath B


3 KW Water Heater for Swimming Pool & bath B


3 KW Water Heater for Swimming Pool & bath. Net Weight: 2.5 kg. The item “3 KW Water Heater for Swimming Pool & bath B” is in sale since Monday, March 26, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “bigdaddy-shop” and is located in CN,CN. This item can be shipped worldwide.

  • MPN: Does Not Apply
  • Brand: Unbranded
3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz


3KW Electric Water Heater Thermostat for Swimming Pool SPA Hot Tub 240V. Designed as water thermostat not water heater. This thermostat is specifically designed for the hot tub, swimming pool, SPA bath, the thermostat is installed in the pipeline. When adding hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath maintained at 39 degrees Celsius, create a more comfortable environment for you. Pipe Diameter: 1 INCHES. Wire: 3 X 4 MM². The initial set temperature settings. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40 °C. Thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature. The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If water cool down, temperatures will be elevated 6 8 °C / h. Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Ultra-high temperature protection switch and reset button. Ultra-high temperature (over 49 °C), ultra-high temperature switch will automatically trip (power off). 1 X Electric Water Heater Thermostat. Please be noted that, this service is more recommended for Monday-Thursday orders. Orders on Friday may be processed on following Monday by UPS, according to UPS’s policy. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Used items will not be accepted for return. We appreciate your business and strived to improve our customer service and our commitment to quality. Thank you for visiting my store! The item “3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat 50/60Hz” is in sale since Thursday, September 26, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “autopartm” and is located in CA&KY. This item can be shipped to United States.

  • Brand: Beamnova
  • MPN: Does not apply
  • Power Source: Electric
  • Power: 3KW
  • Voltage: 240V
  • Current: 14A
  • Phase: 1N-
  • Pipe Diameter: 1 INCHES
  • Wire: 3 X 4 MM²
  • Size: 338*125*124MM
2KW 220V Swimming Pool and Bath SPA Hot Tub Electric Water Heater Thermostat


2KW 220V Swimming Pool and Bath SPA Hot Tub Electric Water Heater Thermostat


2KW 220V Swimming Pool and Bath SPA Hot Tub Electric Water Heater Thermostat


2KW 220V Swimming Pool and Bath SPA Hot Tub Electric Water Heater Thermostat. Description: – The thermostat is designed specifically Jacuzzi, the thermostat is mounted on the bottom of the pipe jacuzzi, when starting the pump after adding hot water bath, the thermostat automatically heat insulation, water temperature bath maintained at between 30-40 can transfer to your jacuzzi create a comfortable environment. Our this product is fit for the pool with one cubic metre of water, and cannot work with salt water. Sepcifications: – Material:Metal – Size:33×12.5cm – Input voltage:220V – Power:2KW – Current:13.6A – Phase parameters:single phase – Suitable For:Swimming Pool Equipment Features: – The product is small, easy to install in the circulation pipe jacuzzi tub bottom. The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology. When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance(chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. Packing Included: – 1 x Thermostat Set. Or unpaid dispute will be filed for non-payer after 7 days of sales day. If you receive defective item, please kindly notify us within 14 days. The item “2KW 220V Swimming Pool and Bath SPA Hot Tub Electric Water Heater Thermostat” is in sale since Monday, October 30, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “topskyrc” and is located in HK. This item can be shipped worldwide.

  • Power Source: Electric
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Material: Iron
  • Model: 2KW 220V
  • Bundle Listing: No
9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric


This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Operating voltage: AC220V 50HZ / 60HZ Output load: 10A / 220V AC Power: 9KW Control range: 65 (MAX) Resolution: 1 Accuracy: ± 1 Input signal: one road measure temperature sensor, 20K X 1.5m Machine size: 44.6 x 34.1 x 10.4 cm/L x W x H Outer hole size: 38mm/1.5inch Inner hole size: 38mm/1.5inch Note: Please allow ±1cm error due to manual measurement. Before using the installation requirements. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. 1 x 9KW 220V Swimming Pool Electric Water Heater. The item “9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric” is in sale since Wednesday, September 11, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “cheerful2017″ and is located in HK. This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • MPN: HTS8399843
  • Power Source: Electric
  • Operating voltage: AC220V 50HZ / 60HZ
  • Output load: 10A / 220V AC
  • Power: 9KW
  • Control range: 65 (MAX)
  • Resolution: 1 Accuracy: ± 1
  • Manufacturer Part Number: HTS8399843
220V 15KW Thermostat Swimming Pool SPA Bath Water Heater Touch Screen Control


220V 15KW Thermostat Swimming Pool SPA Bath Water Heater Touch Screen Control


220V 15KW Thermostat Swimming Pool SPA Bath Water Heater Touch Screen Control


220V 15KW Thermostat Swimming Pool SPA Bath Water Heater Touch Screen Control


Operating: touch screen Storage / Tankless: Storage 5000W”> Power (W): 5000W”>>5000W Voltage (V): 220V Capacity: 4 People Type: Sauna Rooms (Update) Function: Wet Steam Feature: Computer Control Panel Power: 15kw Herze: 50-60hz. New 15KW 220V Thermostat Swimming Pool & SPA Home Bath Hot Tub Electric Water Heater ST series pool heaters are special used for small pool less than 5CBM, massage pool and hot spring to heat and keep warm; Meanwhile, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch, it improves greatly of trouble free in working time, adaptability of water environment and stability. Manual reset temperature control switch. Once unexpected high temperature 60C occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the’Reset’ button to restart the heater. We are professionals in producing and developing heaters for over 10 years. ST and PHS are the newest generation with our unique control system. With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. A, The flow-temperature sensor is always under the control of software, accurately monitoring the temperature status of the whole system, and then adjust the settings to maintain the water temperature and protect the heater from unexpected situations. B, No mechanical sensors, avoid any mechanical failure to affect the function of the heater. C, Avoid affection of ion accumulation to mechanical sensors. D, Greatly reduce unnecessary circulation cycles, prolong the life of circulation pumps and save more energy. The control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens. If any fault happens, the heater is stopped immediately, and corresponding hint message will display on the panel for user or technician to decide where the fault is. The safety of customer is the top priority. When you make order of pool heater (spa heater), please leave massage about the pipe connection diameter you need:48mm or 50mm? Or we will send 48mm. International buyers please note. The item “220V 15KW Thermostat Swimming Pool SPA Bath Water Heater Touch Screen Control” is in sale since Monday, June 4, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “cnc-mall” and is located in Shenzhen,Guangdong. This item can be shipped worldwide.

  • MPN: Does Not Apply
  • Brand: Unbranded
  • Power: 15KW
  • Voltage: 220V
  • Model: Swimming Pool Thermostat
9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital


This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Operating voltage: AC220V 50HZ / 60HZ Output load: 10A / 220V AC Power: 9KW Control range: 65 (MAX) Resolution: 1 Accuracy: ± 1 Input signal: one road measure temperature sensor, 20K X 1.5m Machine size: 44.6 x 34.1 x 10.4 cm/L x W x H Outer hole size: 38mm/1.5inch Inner hole size: 38mm/1.5inch Note: Please allow ±1cm error due to manual measurement. Before using the installation requirements. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. 1 x 9KW 220V Swimming Pool Electric Water Heater. The item “9KW 220V Swimming Pool & SPA Tub Water Heater Bath Thermostat Electric Digital” is in sale since Thursday, August 8, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “ellieshang” and is located in HK. This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • MPN: HTS8399843
  • Power Source: Electric
  • Operating voltage: AC220V 50HZ / 60HZ
  • Output load: 10A / 220V AC
  • Power: 9KW
  • Control range: 65 (MAX)
  • Resolution: 1 Accuracy: ± 1
  • Manufacturer Part Number: HTS8399843
3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat


Sign up to Newsletters. 220V 3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat. Thermostat is designed specifically for the needs of the Jacuzzi, the thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the thermostat automatically heating insulation, the bath water temperature maintained at 30-40 adjustable, it can give your massage bathtub to create a comfortable environment. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40°C. The operation of the thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. The 220V/3KW thermostat is designed to efficiently maintain the water temperature of a standard bathtub at the preset level of 40 (104). However, if starting with cold water, the thermostat will increase the temperature at a rate of 6 to 8 (11 to 14) per hour, depending on the initial water temperature, the room temperature, and the size of the bathtub. Once turned ON the thermostat stays ON until the temperature reaches the preset temperature, and then it will turn OFF automatically. It will stay OFF until the temperature drops a few degrees below the preset value, then it will turn back ON. The thermostat continues this ON/OFF cycle for as long as the pump is ON. The indicating lamp is located marks HEATER place. High Temperature Protection/Reset Button. In addition to the regulating thermostat, the thermostat is equipped with a manual reset High Temperature Protection to protect the user against the hazards of high temperatures. In the event of water or the thermostat enclosure reaching temperatures of higher than 49(120) because of blockage or other reasons, the High Temperature Protection will trip(interrupt power) immediately. In order to reset, let the water cool down to approximately 38 (100), then simply push the Reset Button on the top panel. The thermostat should resume operation in the normal manner. The thermostat is equipped with a pressure-sensing switch that protects the thermostat against the hazard of running the system without water. If the water level is low at the beginning or drops low during the operation water pressure is lower than 20KPa (about 2000mmHO2) the pressure sensing switch will interrupt power. Heater can only come ON when the water is at the appropriate level (water pressure is above 20KPa) and the water pump is running. Under no circumstances should any of the outlet (side) ports be closed. Water must flow through both ports when the thermostat is on. At the same time, inlet of heater must be installed perfectly matching to the outlet of water pump to give maximum water flow. Try to ensure that a minimum length of piping is maintained between the thermostat and any opening to the tub. Take off the joint on the outlet/inlet of the thermostat. Glue one side of the joint to the pipe tightly first, then hand tighten the other side to the outlet/inlet of the thermostat. After the installation of the water pump, heater and fitting system, a complete draining must take place, no water is allowed. When using electrical products basic precautions should always be followed, including the following. All electrical connections must be performed by a qualified electrician in compliance with all applicable national and local codes. Danger risk of electric shock connect only to a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI). To prevent the risk of electrocution, check heater for proper ground connection. The thermostat must be properly grounded with a conductor equal to or greater than the power supply conductors. Before making any electrical connection or during installation and service make certain that the electrical power is turned off at the source or circuit breaker and take measures that it CANNOT accidentally be turned on again. Provides the suitable power line according to the thermostat. Connect the provided 220V, 3 wires with grounding branch circuit to a suitable junction box near the thermostat. The power supply should be 220V/50Hz. The blue wire should be connected to L terminal, orange wire should be connected to N terminal and the yellow and green wire should be connected to the ground terminal. Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installe. The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology. When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance (chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. The product is small, easy to install in the bathtub at the bottom of the circulating massage pipe. Pipe Dimeter: 1/2.54cm. Size: 340 122 125mm/13.44.85inch. Net Weight: 2kg/4.4lbs. Phase Parameters: Single Phase. Suitable For: Swimming Pool Equipment. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Westminster Hwy, Richmond, BC, Canada. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “3KW 220V Swimming Pool & Bath Tub SPA Heater Electric Heating Thermostat” is in sale since Wednesday, February 20, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “hotitemsale” and is located in Richmond. This item can be shipped worldwide.

  • Brand: VEVOR
  • MPN: FGFDG00701521164683
  • Model: B-M3-50MM
  • Material: Metal
  • Voltage: 220-240V/50-60Hz
  • Power: 3KW
  • Current: 14A
  • Wire: 3*4 Square millimeter
  • Pipe Dimeter: 2.54cm/1inch
  • Size: 340 * 122 * 125mm/13.4*4.8*5inch
  • Net Weight: 2kg/4.4lbs
  • Phase Parameters: Single Phase
  • Suitable For: Swimming Pool Equipment
  • Interface size: 50mm/1.97inch
3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath


Sign up to Newsletters. 220V 3KW Swimming Pool SPA Bath Hot Tub Electric Water Heater Thermostat. Thermostat is designed specifically for the needs of the Jacuzzi, the thermostat installed in the bottom of the tub on the massage tub, after adding hot water in the bath, start the water pump, the thermostat automatically heating insulation, the bath water temperature maintained at 30-40 adjustable, it can give your massage bathtub to create a comfortable environment. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger, however, users should be done after the installation is complete, the first under the premise of safety checks to ensure that the operation of the thermostat’s normal function, by using the tub filled with water to a suitable level and start the system automatically checks and let the system run until the thermostat temperature stabilized at the highest level and display lights go out, use an accurate thermometer to measure the water temperature should be at 40°C. The operation of the thermostat is fully automatic. When installed properly it will turn ON after user have set the temperature by turning the controlling switch clockwise, then the heating-up indicator turns on. As long as the thermostat is on, it will heat up the water to the user-set level and maintain the temperature. User can turn the controlling switch anticlockwise to a temperature lower than the current water temperature to turn OFF the thermostat, and the heating-up indicator turns off. There is no separate heat controller for user. The 220V/3KW thermostat is designed to efficiently maintain the water temperature of a standard bathtub at the preset level of 40 (104). However, if starting with cold water, the thermostat will increase the temperature at a rate of 6 to 8 (11 to 14) per hour, depending on the initial water temperature, the room temperature, and the size of the bathtub. Once turned ON the thermostat stays ON until the temperature reaches the preset temperature, and then it will turn OFF automatically. It will stay OFF until the temperature drops a few degrees below the preset value, then it will turn back ON. The thermostat continues this ON/OFF cycle for as long as the pump is ON. The indicating lamp is located marks HEATER place. High Temperature Protection/Reset Button. In addition to the regulating thermostat, the thermostat is equipped with a manual reset High Temperature Protection to protect the user against the hazards of high temperatures. In the event of water or the thermostat enclosure reaching temperatures of higher than 49(120) because of blockage or other reasons, the High Temperature Protection will trip(interrupt power) immediately. In order to reset, let the water cool down to approximately 38 (100), then simply push the Reset Button on the top panel. The thermostat should resume operation in the normal manner. The thermostat is equipped with a pressure-sensing switch that protects the thermostat against the hazard of running the system without water. If the water level is low at the beginning or drops low during the operation water pressure is lower than 20KPa (about 2000mmHO2) the pressure sensing switch will interrupt power. Heater can only come ON when the water is at the appropriate level (water pressure is above 20KPa) and the water pump is running. Under no circumstances should any of the outlet (side) ports be closed. Water must flow through both ports when the thermostat is on. At the same time, inlet of heater must be installed perfectly matching to the outlet of water pump to give maximum water flow. Try to ensure that a minimum length of piping is maintained between the thermostat and any opening to the tub. Take off the joint on the outlet/inlet of the thermostat. Glue one side of the joint to the pipe tightly first, then hand tighten the other side to the outlet/inlet of the thermostat. After the installation of the water pump, heater and fitting system, a complete draining must take place, no water is allowed. When using electrical products basic precautions should always be followed, including the following. All electrical connections must be performed by a qualified electrician in compliance with all applicable national and local codes. Danger risk of electric shock connect only to a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI). To prevent the risk of electrocution, check heater for proper ground connection. The thermostat must be properly grounded with a conductor equal to or greater than the power supply conductors. Before making any electrical connection or during installation and service make certain that the electrical power is turned off at the source or circuit breaker and take measures that it CANNOT accidentally be turned on again. Provides the suitable power line according to the thermostat. Connect the provided 220V, 3 wires with grounding branch circuit to a suitable junction box near the thermostat. The power supply should be 220V/50Hz. The blue wire should be connected to L terminal, orange wire should be connected to N terminal and the yellow and green wire should be connected to the ground terminal. Do not allow any electrical appliances (such as lights, telephone, hair dryer, radio or television) in the bathtub, 1.5 meters (5 feet) or less. The thermostat should not be used in salt water, acidic water or alkaline water, can not be used in other places chemically corrosive gases or solvents. Thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installe. The product is easy to operate, provides a mechanical thermostat switch, you can set the temperature of temperature technology. When the product is safe and reliable movement with the flow switch, over-temperature protection switch. All using mechanical control devices durable economy. Heating thermostat liner material is 316 # stainless steel pipe and electric resistance, corrosion resistance (chlorine corrosion), and durable. The thermostat good interior circulation, not dross, easy removal. The product is small, easy to install in the bathtub at the bottom of the circulating massage pipe. Pipe Dimeter: 1/2.54cm. Size: 340 122 125mm/13.44.85inch. Net Weight: 2kg/4.4lbs. Phase Parameters: Single Phase. Suitable For: Swimming Pool Equipment. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. International Buyers Please Note. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Westminster Hwy, Richmond, BC, Canada. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “3kw Pool Heater Thermostat Water Heater 50mm Interface Spa Swimming Pool Bath” is in sale since Friday, November 23, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “businesspleasant” and is located in Richmond. This item can be shipped worldwide.

  • Brand: VEVOR
  • MPN: CXZGC004101521164683
  • Model: B-M3-50MM
  • Material: Metal
  • Voltage: 220-240V/50-60Hz
  • Power: 3KW
  • Current: 14A
  • Wire: 3*4 Square millimeter
  • Pipe Dimeter: 2.54cm/1inch
  • Size: 340 * 122 * 125mm/13.4*4.8*5inch
  • Net Weight: 2kg/4.4lbs
  • Phase Parameters: Single Phase
  • Suitable For: Swimming Pool Equipment
  • Interface size: 50mm/1.97inch
220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT


This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Operating voltage: AC220V 50HZ / 60HZ Output load: 10A / 220V AC Power: 9KW Control range: 65 (MAX) Resolution: 1 Accuracy: ± 1 Input signal: one road measure temperature sensor, 20K X 1.5m Machine size: 44.6 x 34.1 x 10.4 cm/L x W x H Outer hole size: 38mm/1.5inch Inner hole size: 38mm/1.5inch Note: Please allow ±1cm error due to manual measurement. Before using the installation requirements. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. 1 x 9KW 220V Swimming Pool Electric Water Heater. The item “220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater HOT” is in sale since Monday, August 5, 2019. This item is in the category “Garden & Patio\Swimming Pools & Hot Tubs\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “hanzhexuan” and is located in HK. This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • MPN: hQb2497781
  • Power Source: Electric
  • Operating voltage: AC220V 50HZ / 60HZ
  • Output load: 10A / 220V AC
  • Power: 9KW
  • Control range: 65 (MAX)
  • Resolution: 1 Accuracy: ± 1
  • Manufacturer Part Number: hQb2497781
9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater


This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Operating voltage: AC220V 50HZ / 60HZ Output load: 10A / 220V AC Power: 9KW Control range: 65 (MAX) Resolution: 1 Accuracy: ± 1 Input signal: one road measure temperature sensor, 20K X 1.5m Machine size: 44.6 x 34.1 x 10.4 cm/L x W x H Outer hole size: 38mm/1.5inch Inner hole size: 38mm/1.5inch Note: Please allow ±1cm error due to manual measurement. Before using the installation requirements. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. 1 x 9KW 220V Swimming Pool Electric Water Heater. The item “9KW 220V Electric Swimming Pool Digital Thermostat Bath SPA Hot Tub Water Heater” is in sale since Monday, July 22, 2019. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “zhibinoppa” and is located in Shenzhen. This item can be shipped worldwide.

  • Power Source: Electric
  • MPN: gEd3931143
  • Brand: Unbranded/Generic
  • Operating voltage: AC220V 50HZ / 60HZ
  • Output load: 10A / 220V AC
  • Power: 9KW
  • Control range: 65 (MAX)
  • Resolution: 1 Accuracy: ± 1
  • Manufacturer Part Number: gEd3931143