3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater


You may also like. 3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater. This thermostat is designed specifically for the hot tub. When the thermostat is installed in the pipeline jacuzzi, adding hot water bath, start the pump, the thermostat can automatically heat insulation, so the water temperature bath can keep the water temperature between 20-40(68-104) adjustable , give your Jacuzzi a more comfortable environmentset and a most comfortable bath temperature. Thermostat equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating, and protect users against danger. Please strictly follow the instructions before use. Please Note before using the item. Do not place any electrical appliances within 1.5 meters of the thermostat. Do not use the thermostat in saltwater, acid water, or alkaline water. Do not use a thermostat where chemically aggressive gases or solvents. Do not install the thermostat outlet of the bathtub in the middle of pipes or valves or check valves. Temperature heaters should be used with 500W or higher circulating water pumps for normal use. COASTS thermostat outlet to the bath tub in the middle of the pipe or valve or check valve can not be installed. Initial temperature setting: COASTS is equipped with a thermostat switch for ultra-high temperature protection. Thermostats can limit duplication and protect users from danger. However, users should proceed after the installation is complete. To ensure that the thermostat is running accurately, use a bathtub filled with water to the appropriate water level, then start the system to automatically check and let the system run until the temperature of the inverter stabilizes at the highest level and turn off the indicator. Use an accurate thermometer to measure the water temperature. The operation of the COASTS thermostat is automatic, heating clockwise, the indicator light is on, the temperature reaches the preset temperature, and the temperature will remain unchanged. The thermostat can be maintained within a temperature range not exceeding 40°C (104°F). If cold water starts, the temperature will rise by 68°C/h. Automatic heating: the thermostat will first reach the predetermined temperature, and then stop working until the temperature drops a few degrees, the thermostat will automatically open. Ultra high temperature (over 49°C), the ultra high temperature switch will automatically trip (power off). Smart Thermostat – The thermostat comes with a temperature probe, which can sensitively sense the temperature of the pool water. The heating can automatically adjust to the set value of the thermostat. Adjustable temperature range of 20-40(68-104), time can be freely set. Safe &Reliable – Once the flow is small or not enough water pressure, the water inside the thermostatic switch will automatically disconnect the power to prevent damage to the machine. Enhance the safety and service life of the swimming pool thermostat heater. Durable material – The inner tank of the thermostat is stainless steel, and it has a long service life without rust. Internal use of international cables, in line with international standards, without having to worry about product quality problems during use. Simple Operation – The internal circulation of the water heater is smooth, with no scum. It is easy to disassemble. After the correct installation, the user rotates the control switch to set the temperature and the heating indicator lights. The water will automatically heat up to the level set by the user and maintain the temperature. Multiple application – Jacuzzi water heater operation is fully automatic and easy to use. It is suitable for heating constant temperature systems such as small hot springs, swimming pools, and jacuzzis. The inner tank of the thermostat is stainless steel, which does not rust and the water quality is cleaner. The heating is fast, and steam can be quickly released in a short time. Once the temperature is over 60(140), the temperature protection device will trip automatically. Thermostat with a pressure-sensitive switch can be protected from a dangerous operating system in the absence of water. Once the water level is low (water pressure is below 20KPa), the pressure sensor switch will interrupt the power supply. Thermostat temperature preset by the user based on, until the self-heating temperature. When the water temperature drops a few degrees, the thermostat will automatically turn on the heating. The product is small in size, easy to carry and install. It can be installed in the circulation massage tube at the bottom of the bathtub. Applications The thermostat for home sauna is also widely used commercially. It can be applied to multiple scenes such as indoor and outdoor small swimming pools and bathtubs. Input voltage:220V-240V 50/60HZ. Power:2.7-3.3KW (Can fit for 260-530 gallon of swimming pool = 1-2 cube). Current:12.5-13.6A. Gross Weight:3.5kg. Net Weight: 4.4 lbs (2 kg). Wire:0.12″ x 0.16″ (3 x 4 mm²). Pipe Dimeter: 1 (2.54 cm). Size: 5″ x 7″ x 4.5(127 x 178 x 115 mm). Suitable For: Max 2 cbm Hot Tub & Swimming Pool Equipment (260-530 Gallon). 1 x 220V 3KW SPA Heater. Order may be cancelled due to insufficient of your information. Buyers from the following countries. Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box. (2) How we will react? (sometimes you may be requested to return the incorrect item). (3) Valid time for returning. We promise to achieve your 100% satisfaction. Thank you so much for your kindness and understanding. The item “3.3KW 220V Hot Tub Electric Heating Thermostat Swimming Pool SPA Water Heater” is in sale since Friday, January 22, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Swimming Pools, Saunas & Hot Tubs\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “supergrowth” and is located in . This item can be shipped worldwide.

  • BTUh Heating Rating: 50,000-100,000 BTUh
  • Model: costa B-M3
  • Item Height: 5 in (12.7 cm)
  • Water Temperature Range: 40 °C (104 °F)
  • Type: Heat Pump
  • MPN: Does Not Apply
  • Brand: Unbranded
  • Manufacturer Warranty: 3 years
  • Amperage: 14 A
  • Heating System: Instantaneous (Tankless)
  • Water Connection Location: Side
  • Power Source: Electric
  • Features: Auto Shut-Off
  • Manufacturer: costa
  • Current:: 13.6A
  • Weight:: 3.5kg
  • Input voltage:: 220V-240V
  • Power: 3KW
  • Suitable For: Above Ground Pools
  • Voltage: 220V/230V/240V
Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • E-mail this story to a friend!
  • Furl
  • LinkedIn
  • Live
  • MySpace
  • Print this article!
  • Propeller
  • Reddit
  • description
  • Slashdot
  • Spurl
  • StumbleUpon
  • Technorati
  • TwitThis
  • YahooMyWeb

Comments are closed.