200KBTU Heat Exchanger 1INCH +1 1/2 FPT for Salt Water Swimming Pool Spa SS304. The Swimming Pool Heat Exchanger Is Made of. High-grade Anticorrosive Stainless Steel. Which Has the Characteristics of Anti-rust and Salt Water Resistance, so It Is Very Durable and Very Suitable for Chlorine or Salt Water Swimming Pools and Spas. 1 1/2″ Fpt Is Used on One Side of the Swimming Pool Water, and 1″ Fpt Is Used for Hot Water. The Salt Pond Heat Exchanger Adopts an. To Ensure a Continuous Constant Temperature and Indirectly Transfer Heat Between Any Hot Water Circuit, Steam Circuit and Any Swimming Pool or Spa Facility. Hell-and-tube Heat Exchanger Is Based on the 60°C (140°F) Temperature Difference Between the Inlet and Hot Water. And Can Provide a Fresh Pond of 200 Kbtu/Hr. It Gets Hot Immediately Without Waiting. This Kind of Heat Exchanger Is a Very Safe, Reliable, Efficient and Cost-effective Way to Heat Swimming Pools or Spas Through Any Hydraulic System. The Heat Recovery Pool Heater Is Very Suitable for. Swimming Pools, Spas, Hot Tubs, Solar, Hydraulic Heating, Oil Cooling, Heat Recovery, Snow Melting. 1 X Stainless Steel Heat Exchanger. 2 X Fixed Bracket. Product Size: 48.514cm/19.095.5inch. Material: 304 Stainless Steel. Heat Transfer Area: 4.8 Square Feet. Hot Water Flow Rate. Side of Hot Water Pipe: 1 Fpt.
