Swimming Pool Heat Exchanger 200 kBtu/hour 1″+1 1/2″ FPT 304 Stainless Steel New. The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting. This kind of heat exchanger is a very safe, reliable, efficient and cost-effective way to heat swimming pools or spas through any hydraulic system. The heat recovery pool heater is very suitable for swimming pools, spas, hot tubs, solar, hydraulic heating, oil cooling, heat recovery, snow melting, etc. Material: 304 stainless steel. Heat transfer area: 4.8 square feet. Hot water flow rate: 30 L/min. Cold water flow: 250 L/min. Side of hot water pipe: 1 FPT. Same side port: 1 1/2 FPT. Product Size: 48.514cm/19.095.5inch. 1 x stainless steel heat exchanger. 2 x fixed bracket. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Nice and Practical, High Quality Packaging. 11.5lbs(5.2kg). Gas / Wood / Solar / Heat Pump / Electricity. Hot Water flow rate. Side of hot water pipe. 4.8 square feet. 100,001-350,000 BTUh.
