Product description:? The swimming pool heat exchanger is made of high-grade anticorrosive stainless steel, which has the characteristics of anti-rust and salt water resistance, so it is very durable and very suitable for chlorine or salt water swimming pools and spas. 1 1/2″ FPT is used on one side of the swimming pool water, and 1″ FPT is used for hot water. The salt pond heat exchanger adopts an innovative in-line design to ensure a continuous constant temperature and indirectly transfer heat between any hot water circuit, steam circuit and any swimming pool or spa facility. The shell-and-tube heat exchanger is based on the 60°C (140°F) temperature difference between the inlet and hot water, and can provide a fresh pond of 200 kBtu/hr. It gets hot immediately without waiting.
Stainless Steel Tube Pool Heat Exchanger For Spa/Swimming Heat Exchanger 200kBtu. Spa Pool Heat Exchanger 200kBtu Stainless Heat Recovery Pool Heater 1 1/2 FPT. The heat exchanger is made of 304 stainless steel, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation. The heat exchanger is made of 304 stainless steel, which is durable and has a long service time. The heat exchanger can ensure constant temperature, transferring heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. It is based on a temperature difference of 60°C (140°F) between incoming water and hot water, providing 200 kBtu/hr of freshwater. Therefore, it can heat the pool by transferring heat in a short time, so you don’t have to wait very long. It is safe to use because it does not catch fire, leak, burn during operation, which brings great reassurance to you. It does not waste water during operation and tries to make the best use of every drop of water, so it is more water-saving. You can easily clean it without much effort and time because of its smooth surface and fewer gaps. It is suitable for solar power, hydraulic heating, oil cooling, heat recovery, snow melting, etc. It is used in spas, swimming pools, spas, hot tubs, etc. The heat exchanger has four threaded connections ports that can connect other tubes more firmly and tightly, which is uneasy to fall off and affect the heat transfer. The heat exchanger is made of 304stainless steel so that it is. Therefore, it is suitable for chlorine or saltwater pools and spas. Material: 304 Stainless Steel. Heat Transfer Area: 0.45m²/4.8ft². Hot Water Flow Rate: 30L/Min (8L/Min). Cold Water Flow: 250L/Min (66L/Min). Side of Hot Water Pipe: 1inch FPT. Same Side Port: 1 1/2 FPT. Packing Size: 541919cm/217.57.5inch. 48.514cm/19.095.5inch. Connection Port Diameter: 3.8cm/1.5inch, 2.54cm/1inch. Weight: 5.2kg/11.5lbs. The product needs basic assembly. Professional would be highly recommended. 1 x Stainless Steel Heat Exchanger. 2 Sets x Fixed Brackets. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “yybshop06″ and is located in this country: US. This item can be shipped to United States.
- Features: ❤❤❤Great value with warranty❤❤❤
- Type: ppol heat exchanger
- Brand: Unbranded
- Material: 304 stainless steel
- Same Side Ports: 1 1/2\
- Weight: 11.5lbs(5.2kg)
- Power Source: Gas / Wood / Solar / Heat Pump / Electricity
- Output: 200 kBtu/hour
- Hot Water flow rate: 30 L/min
- Cold water flow: 250 L/min
- Side of hot water pipe: 1\
- Country/Region of Manufacture: China
- Heat transfer area: 4.8 square feet
- Packing size: 54*19*19cm
- Suitable For: Above Ground Pools
- BTUh Heating Rating: 100,001-350,000 BTUh
You may also like. 9KW Digital Electric Water Heater Thermostat SPA&Swimming Pool Hot Tub 220V NEW. NoteThe thermostat only has a constant temperature function. This product needs to be used with a circulation system. NoteThis product is suitable for up to 9 cubic meters of pool. This product incorporates a wide range of refrigeration technology, simple operation and precise temperature control. Anti-interference ability, suitable for all kinds of refrigeration, heating equipment automatic intelligent control system. Sensors with a special precision machining package with moisture barrier, stable and reliable performance. Operating voltage: AC220V 50HZ / 60HZ. Output load: 10A / 220V AC. Control range: 55? (MAX). Resolution: 1? Accuracy: ± 1? Input signal: one road measure temperature sensor, 20K X 1.5m. Machine size: 49x 10 x 38cm/L x W x H. Outer hole size: 38mm/1.5inch. Inner hole size: 38mm/1.5inch. Before using the installation requirements. The power supply voltage and the voltage marked on the machine to be consistent, deviation of supply voltage and the rated voltage is not more than ± 10%. The sensor should maintain an appropriate distance from the power line, avoid contact or close. The strict distinction between sensors, power lines and the output relay interface. Read through the manual carefully to know better about the heater’s installation and operation, and check the parameters before installation. Check the circulation system first before turn on the heater. Never disassemble the heater when connecting to power supply. Never turn on the heater without water. No power switch is designed for the heater. The front panel switch can only turn off the controller, thus you should cut off the main power supply before performing maintenance or repair. Proper grounding is important. Start the circulation pump for at least 2 minutes before turn on the heater, and turn off the circulation pump at least 2 minutes after turn off the heater. Once unexpected high temperature 60? 140? Occurs, the temperature switch cuts off the system. You need to cut off the main power supply, resolve the fault and wait the temperature to fall below normal temperature, then press the’Reset’ button to restart the heater. 1 x 9KW 220V Swimming Pool Electric Water Heater. Note The thermostat only has a constant temperature function. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. The item “9KW Digital Electric Water Heater Thermostat SPA&Swimming Pool Hot Tub 220V NEW” is in sale since Wednesday, August 15, 2018. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “fantastic-dealer” and is located in Rowland Heights, California. This item can be shipped to United States.
- MPN: Does not apply
- Brand: Unbranded
- Bundle Listing: Yes
- Operating voltage: AC220V 50HZ / 60HZ
- Output load: 10A / 220V AC
- Power: 9KW
- Control range: 55 (MAX)
- Resolution: 1 Accuracy: ± 1
- Machine size: 49x 10 x 38cm/L x W x H
- Outer hole size: 38mm/1.5inch
- Inner hole size: 38mm/1.5inch
