Pool/Spa Part – Hayward FDXLICB1930 Replacement Integrated Control Board for Universal H-Series Units. Hayward FDXLICB1930 Replacement Integrated Control Board for H-Series Units. Hayward Pool Products Inc. Catalog Part Number: 6223-175. View more great items! This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “intheswimpoolsupplies” and is located in this country: US. This item can be shipped to United States.
- Product Type: Pool Part
- UPC: 0610377072854
- EAN: 0610377072854
- Brand: Hayward
- Type: Integrated Control Board
- Power Source: Electric
- Item Height: 7.4 in
- Manufacturer: Hayward
- Model: FDXLICB1930
- MPN: FDXLICB1930
- Item Length: 7.82 in
- Suitable For: Hot Tubs, In Ground Pools
- Item Width: 5.31 in
- Item Weight: 0.09 lb
Description The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivering 135 kBtu of heat in one hour, so it is of high efficiency. The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. It is very suitable for pools, spas, hot tubs, solar energy, hydraulic heating, oil cooling, heat recovery, snow melting, etc. High Quality Stainless Steel Swimming Power Saving Heat Exchanger Shell Tube. The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and has a long service life. 1 Stainless Steel Heat Exchanger. High Durability: The pool heat exchanger is made of 304 stainless steel that has good rust and salty water resistance, so it is more durable and very suitable for chlorine or salt water swimming pools and spas. High Efficiency: The pool heat exchanger is based on the 60°C (140°F) temperature difference between the incoming water and the hot water, delivers 135 kBtu of heat in one hour, so it is of high efficiency. Innovative Design: The pool heat exchanger uses an innovative spiral-wound design to ensure a constant temperature. High Compatibility: It transfers heat indirectly between any hot water circuit, steam circuit, and any pool or spa facility. Rapid Heating: With an output of 135 KBtu per hour, this pool heat exchanger ensures the pool gets hot quickly without waiting, saving your time and energy. Healthy and Hygienic : This heat exchanger is a non-storage type, where the hot and cold fluids have separate channels and do not mix with each other. This design ensures that the water source is clean and free of contamination. Easy to Clean: Because of its smooth surface and few crevices, it can be easily cleaned with a damp cloth without much effort and time. We will reply and solve the problem for you as soon as possible. Side of Hot Water Pipe: 2.54cm/1in FPT. Same Side Port: 3.81cm/1.5in FPT. Product Size: 3314cm/135.5in. Packing Size: 401919cm/15.757.487.48in. Weight: 3.4kg/7.5lbs. Material: 304 Stainless Steel. Heat Transfer Area: 3.2ft². Hot Water Flow Rate: 25 L/min. Cold Water Flow: 200 L/min. Spiral Wound Design: The spiral wound design of the pool heat exchanger effectively ensures the constant temperature when working. Food-grade Material: The pool heat exchanger is made of 304 food-grade stainless steel that is healthy to use. 1 1/2″ FPT is used for one side of the pool water and 1″ FPT is used for hot water. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “super-medical-shop” and is located in this country: US. This item can be shipped to United States.
- Cold Water Flow: 200 L/min
- Same Side Port: 3.81cm/1.5in FPT
- Output: 135 KBtu/Hour
- Material: 304 Stainless Steel
- Side of Hot Water Pipe: 2.54cm/1in FPT
- Packing Size: 40*19*19cm/15.75*7.48*7.48in
- Heat Transfer Area: 3.2ft²
- Item Weight: 3.4kg/7.5lbs
- Hot Water Flow Rate: 25 L/min
- Product Size: 33*14cm/13*5.5in
- Suitable For: POOL
- BTUh Heating Rating: 135 kBtu/hour
- Heating System: immediately heating
- Features: innovative in-line design
- Water Temperature Range: 140°F temperature difference
- Type: ppol heat exchanger
- Brand: Unbranded
- Same Side Ports: 1 1/2\
- Power Source: Gas / Wood / Solar / Heat Pump / Electricity
- Country/Region of Manufacture: China
Stainless Steel Heat Exchanger : SP-155K. Swimming pool heat exchangers have an innovative spiral-twisted corrugated tube design that is engineered to maximize solar or boiler energy, increasing the overall thermal efficiency of the system. The tube’s design also ensures high velocities inside the unit, making our swimming pool heat exchanger a very reliable, efficient and cost-effective way to transfer heat indirectly between any hot water circuit, steam circuit and any pool or spa application. Pool heating capacity up to 11,900 gallon 155 kBtu/hr pool based on 60 degrees C (140 degrees F) temperature difference between incoming heating and heated water. 1 1/2″ FPT opposite side for pool water and 1″ FPT for hot water. Fully made of high-grade anti-corrosion stainless steel 316L for swimming pool, spa and hot tub. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “stonedigger2010″ and is located in this country: US. This item can be shipped to United States.
- BTUh Heating Rating: Less Than 50,000 BTUh
- Model: SP-115K
- Power Source: Wood
- Type: Pool Heat Exchanger
- Brand: Unbranded
- Suitable For: Above Ground Pools, Hot Tubs, In Ground Pools
- Heating System: Boiler
300,000 BTU Stainless Steel Tube and Shell Heat Exchanger for Pools/Spas ss. 300,000 BTU Stainless Steel Tube and Shell Same Side Ports GPM Boiler Side – 11.16 GPM Pool Side – 86.11 Boiler Ports – 11/2″ NPT Pool Ports – 2″ NPT Port to Port – 20 1/2″ Diameter – 3 3/16″ Length – 27 1/2 Number of Tubes – 36 PSI Drop Hot. 56 PSI Drop Cold – 1.63 Working Pressure – 80 PSI BTU rated with 180F Boiler and 80F Pool This unit is suitable for pools/spas that are 25,800 gallons. These heat exchangers are constructed with a stainless steel 316L shell and stainless steel 316L corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 1 1/2″ – (to/from Pool) 2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Stainless Steel Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precautions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Stainless Steel Pool and Spa Heat Exchangers are not suited for saline or salt water environments. For those applications please use one of our Titanium units. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;2. Nominal values are based on 60°C temperature between incoming heating and heated water. Typical residential application: – Swimming pools, spas heating- Hot tube heating- Floor heating- Driveway snowmelts Typical industrial application: – Oil cooling or heating- Steam condenser- District heating- Transmission and engine cooler- Boiler sample cooler- Waste water heat recovery- Industry process applications IMPORTANT!! The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers: Hydrochloric Acid up to 0.1% concentration Solutions the contain MCI Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation) Any fluid that will deposit alkaline residue or phosphorous It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. 300,000 BTU Stainless Steel Tube and Shell. GPM Boiler Side – 11.16. GPM Pool Side – 86.11. Boiler Ports – 11/2 NPT. Pool Ports – 2 NPT. Port to Port – 20 1/2. Diameter – 3 3/16. Length – 27 1/2. Number of Tubes – 36. PSI Drop Hot. PSI Drop Cold – 1.63. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 25,800 gallons. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. The following fluids are prohibited for use as a flushing agent for stainless steel pool and spa heat exchangers. Hydrochloric Acid up to 0.1% concentration. Solutions the contain MCI. Chlorides (MgCI2, NaCI between 0.01 – 1%, CuCI up to 1%, CaCI2 from 5% to saturation). Any fluid that will deposit alkaline residue or phosphorous. It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in this country: US. This item can be shipped worldwide.
600,000 BTU Titanium Tube and Shell Heat Exchanger for Saltwater Pools/Spa ss. 600,000 BTU Titanium Tube and Shell Same Side Ports GPM Boiler Side – 17.44 GPM Pool Side – 114.16 Boiler Ports – 2″ NPT Pool Ports – 21/2″ NPT Port to Port -25 3/8″ Diameter – 4 3/8″ Length – 33 1/2 Number of Tubes – 42 PSI Drop Hot – 1.22 PSI Drop Cold – 3.07 Working Pressure – 80 PSI BTU rated with 180F Boiler and 80F Pool This unit is suitable for pools/spas that are 51,600 gallons. These heat exchangers are constructed with a Titanium shell and Titanium corrugated inner tubes to ensure high velocities inside the unit. This is a very reliable, efficient and cost effective way to transfer heat indirectly between any boiler circuit and any pool or spa circuit. The units are designed for both horizontal and vertical mounting. Port sizes: (to/from Boiler) 2″ – (to/from Pool) 2 1/2″. It is recommended to always install the unit with the mounting bracket (mounting brackets included with each unit) fixed to a wall, and/or ceiling or floor to prevent water hammer or vibrations which could damage the unit. Always install the Titanium Pool & Spa Heat Exchanger in a counter flow pattern. The units should be installed downstream of the filtration and pumping equipment. The boiler water must be assisted and the usual precaustions taken to prevent air locks. The pool water pump should be controlled by a thermostat in the pool pipe work before the heat exchanger and set at the required temperature. Titanium Pool and Spa Heat Exchangers are suited for a large range of chemical environments and conditions, due to a thin, invisible, but extremely protective surface oxide film (primarily TiO2). Titanium is especially known for its elevated resistance to localized attack and stress corrosion in aqueous chlorides e. Brines, seawater and other halides and wet halogens e. Wet CI2 or CI2 sat, brines, and to hot, highly oxidizing, acidic solutions e. FeCI3 and nitric acid solutions. Titanium is also recognized for its superior resistance to erosion, erosion-corrosion, cavitations and impingement in flowing, turbulent fluids. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;2. Nominal values are based on 60°C temperature between incoming heating and heated water. Typical residential application: – Swimming pools, spas heating- Hot tube heating- Floor heating- Driveway snowmelts Typical industrial application: – Oil cooling or heating- Steam condenser- District heating- Transmission and engine cooler- Boiler sample cooler- Waste water heat recovery- Industry process applications IMPORTANT!! It is the purchaser’s responsibility to ensure that all fluids in contact with the products are compatible with the construction material of the product, this includes operational fluids and cleaning fluids. Corrosive environments are often a combination of chemical levels, flow rates and temperatures. Failure to ensure this will result in damages to the product. 600,000 BTU Titanium Tube and Shell. GPM Boiler Side – 17.44. GPM Pool Side – 114.16. Boiler Ports – 2 NPT. Pool Ports – 21/2 NPT. Port to Port -25 3/8. Diameter – 4 3/8. Length – 33 1/2. Number of Tubes – 42. PSI Drop Hot – 1.22. PSI Drop Cold – 3.07. Working Pressure – 80 PSI. BTU rated with 180F Boiler and 80F Pool. This unit is suitable for pools/spas that are 51,600 gallons. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate. Swimming pools, spas heating – Hot tube heating – Floor heating – Driveway snowmelts. Oil cooling or heating – Steam condenser – District heating – Transmission and engine cooler – Boiler sample cooler – Waste water heat recovery – Industry process applications. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “badger-pipe” and is located in this country: US. This item can be shipped worldwide.
11/15/18KW Electric Swimming Pool Water Heater Thermostat Hot Tub Spa. If an error occurs, the pool heater will stop immediately and a message will appear on the control panel so that the user or technician can determine where the error is. The safety of the customer is a top priority. Prohibit the use of seawater or salt-added disinfectants to sterilize thermostats(Excessive chlorine in disinfecting water is not good either, About 5 grams of water per cubic meter), as highly concentrated saltwater is very corrosive to stainless steel. Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. Suitable for: hot tub & swimming pool equipment. The thermostat must work with a water pump with an appropriate capacity. If the pump and thermostat do not match, the flow rate is too low, the heating pipe is dry and can easily be damaged. 5.5KW-15KW heaters must operate with a pump with a water flow of at least 177 ft³ / hour (5m³/hour). 18KW-36KW heaters must operate with a pump with a water flow of at least 353 ft³ / hour (10m³/hour). 40KW-60KW heaters must operate with a pump with a water flow of at least 530 ft³ / hour (15m³/hour). The 1KW is suitable for 1 ft³? The 5.5KW thermostat is suitable for = 127 ft³ pool / 3.6m³? The 9KW thermostat is suitable for a pool with = 212 ft³ / 6m³? The 11KW thermostat is suitable for a pool with = 259 ft³ / 7.3m³? The 15KW thermostat is suitable for a pool of = 353 ft³ / 10m³? The 18KW thermostat is suitable for a pool with = 424 ft³ / 12m³. It is recommended to use the thermostat with a circulating water pump. Operating procedure: first turn on the water pump and then the thermostat. Shutdown: First turn off the thermostat, wait a while (10 seconds to 1 minute depending on the performance of the thermostat) and then turn off the pump. Reliable leak protection devices must be installed and commissioned by the responsible electrician. Monthly maintenance and inspection. The additional heating effect of the thermostat is better. Direct heating requires the use of a more powerful machine. 1 pool heater 1 English manual. Manual reset temperature switch? Prevent water from burning dry and protect the pool heater from overheating. Automatic shutdown in case of lack of water? The thermostat will not work if the pump does not start. It can effectively prevent water shortage and non-standard operation from damaging the machine. It will turn off automatically when the temperature reaches the temperature, and it can automatically start the heating function after the temperature is lowered, which can effectively prevent damage from excessive machine temperature. If the current is too large, the circuit breaker is immediately disconnected and the power supply interrupted. Use the AC contactor as a start switch. Regardless of the type of accident, you can quickly disconnect the power supply and protect the safety of the machine and people. The control system continuesly monitors the operating status of all parts of the heater and reacts quickly and displays appropriate notification messages for each event to prevent from damage or malfunctions. We are not responsible for undeliverable address. X’mas or other reasons. Your patience is always appreciated. Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 1. If it’s non-workdays, please kindly be patient and considerable to give us a little more time. Specifications: Liner material: stainless steel Voltage: 220V (Transformer required) Power: 11KW/15KW/18KW Phase: single phase Connection size: 40 mm (1.57) Machine size: 49 x 10 x 38 cm / L x W x H. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “comettgood” and is located in this country: US. This item can be shipped to United States.
- Option: 18KW 220V
- Brand: Unbranded
- Type: Pool Heater
- Power Source: Electric
- Suitable For: Above Ground Pools,Hot Tubs,Inflatable & Kid Pools
- Voltage: 220 V
- Features: Portable,Digital Display
- Heating System: Instantaneous (Tankless)
- Water Temperature Range: max. about 55℃,130 °F
- Country/Region of Manufacture: China
- Water Connection Location: Side
- Custom Bundle: No
- Amperage: 50 A
- Item Height: 15 in
- Item Length: 19 in
- Item Width: 4 in
Amerec Element 208V 18KW E106810. New unused stock left over from a hospital closure. Item location: C Rack – T3 (JL). This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “industrialmanagement” and is located in this country: US. This item can be shipped to United States.
- Brand: Element
- Type: Element
- Voltage: 208V
- Model: G18S
- MPN: OXI6058-04
The Hayward Universal H-Series Propane Gas Pool and Spa Heater brings you quiet, efficient heating for your pool and spa. Hayward Propane Gas heaters are quiet, certified for low NOx emissions and eco-friendly making for a dependable, safe pool heater you can trust. Combining advanced technology with universal-fit flexibility, the Hayward H-Series is perfect for new or existing pool systems, delivering state-of-the-industry performance. Hayward Universal H-Series Pool Heater FeaturesThe Hayward Universal H-Series Propane Gas Pool and Spa Heater utilizes industry-leading hydraulic performance, reducing circulation pump run time while saving energy. The cupro-nickel heat exchanger provides exceptional corrosion resistance and erosion protection Ideal for today’s salt-based electronic. W3H150FDP Universal H-Series, Low NOx, 150K BTU, Propane, Pool & Spa Heater. Hayward Universal H-Series Pool Heater Features. The Hayward Universal H-Series Propane Gas Pool and Spa Heater utilizes industry-leading hydraulic performance, reducing circulation pump run time while saving energy. The cupro-nickel heat exchanger provides exceptional corrosion resistance and erosion protection Ideal for today’s salt-based electronic chlorination systems. Silicon Nitride Ignition System and Insulated Fire Tile® Combustion Chamber allow for fast dependable lighting while securely trapping the heat, delivering the most performance for every BTU. The digital LED display maintains water temperature, monitoring the heater’s performance with self-diagnostic capability. The Hayward H-Series’ Finn Plate cupro-nickel heat exchanger has special V-groove design for faster heating and longer life. Hayward Universal H-Series, Low NOx, 150,000 BTU, Propane Gas, Pool and Spa Heater delivers energy efficient heating to your pool’s water that you can trust. Hayward Universal H-Series – Versatility & Power. Using propane gas, the Hayward H-Series is reliable and boasts higher heating efficiencies. Being extremely versatile, Hayward Universal H-Series Heaters allow you to configure water, gas and electric connections on either the right or left side for unprecedented installation flexibility. Connecting your propane gas line is super easy to install with the Hayward H-Series built-in 3/4 gas connection. With a lightweight, low-profile, compact design, the Hayward Propane Gas Pool and Spa Heater installs with virtually all new and existing equipment pads. What are the dimensions of the unit? Heater Dimensions: 21″ Width x 29-1/2″ Depth x 24 Height. What Heat Exchanger type of the Hayward Universal H-Series Pool Heater? Is this unit Low NOx? Yes, this unit meets all state air quality regulations. This unit is plumbed 2″ and comes with 2″ unions for installation. View more great items! This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Heaters & Solar Panels”. The seller is “poolsupplyworld” and is located in this country: US. This item can be shipped to United States.
- Manufacturer: Hayward
- Manufacturer Warranty: 3 years
- Product Type: Pool Heater
- UPC: 0610377387200
- EAN: 0610377387200
- BTUh Heating Rating: 150,000
- Brand: Hayward
- Type: Solar Liner
- Power Source: Propane
- Item Height: 30in.
- Voltage: 220 V
- Model: W3H150FDP
- MPN: W3H150FDP
- Item Length: 33.30in.
- Suitable For: In Ground Pools
- Item Width: 33.30in.
- Item Weight: 145lbs.
